The Danfoss 132F0002 is a VLT Micro Drive FC 51 frequency inverter rated 0.37 kW, type code FC-051PK37S2E20H. It runs from a 1 x 200-240 V supply at 50 or 60 Hz, delivers a rated output current of 2.2 A, and comes in the M1 enclosure, 150 mm high by 70 mm wide by 148 mm deep, weighing 1.1 kg.
The VLT Micro Drive is the general purpose drive in the Danfoss VLT range: the one fitted to fans, pumps, conveyors, mixers, extruders and simple machine axes where the job is to control the speed of a standard AC motor and nothing more. It is built to the same quality standard as the larger VLT drives, which is why it is still running on machines fifteen years after installation, and it is the drive most often ordered as a replacement in this power class.
Output frequency runs from 0 to 200 Hz, overload capacity is 150 percent for 60 seconds, and motor control is by U/f or VVC plus, so it drives a standard induction motor without any special setup. On this power size there is no built-in brake chopper; sizes from 1.5 kW upwards have one. The RFI filter is integrated, and Automatic Motor Tuning measures the motor at commissioning so the drive matches it without manual data entry.
Enclosure rating is IP20 for mounting inside a control cabinet, and it converts to Type 1 with the optional kit. Drives can be mounted side by side with no clearance between them, which matters when several are fitted in one panel. The built-in PI controller can close a pressure or flow loop without a PLC, the Smart Logic Controller handles simple sequences on its own, and flying start lets the drive catch a motor that is already turning, such as a fan in a duct.
The drive is supplied without a control panel. Add an LCP 11 (132B0100) or an LCP 12 with potentiometer (132B0101) if you need to set parameters at the machine, or use the free MCT 10 software over the serial port. We quote the panel with the drive if you ask for it.
| Brand | Danfoss |
|---|---|
| Danfoss code number | 132F0002 |
| Type code | FC-051PK37S2E20H |
| Alternative spelling | FC051PK37S2E20H |
| Product family | VLT Micro Drive FC 51 |
| Motor power | 0.37 kW |
| Supply voltage | 1 x 200-240 V, 50/60 Hz |
| Rated output current | 2.2 A |
| Enclosure size | M1 |
| Output frequency | 0 Hz to 200 Hz |
| Overload capacity | 150 % for 60 seconds |
| Motor control principle | U/f and VVC plus |
| Brake chopper | Not fitted on this power size |
| RFI filter | Integrated |
| Enclosure rating | IP20, convertible to Type 1 with the optional kit |
| Height | 150 mm |
| Width | 70 mm |
| Depth | 148 mm |
| Weight | 1.1 kg |
| Control panel | LCP 11 or LCP 12 optional, code numbers 132B0100 and 132B0101 |
| Built-in functions | PI controller, Automatic Motor Tuning, Smart Logic Controller, flying start, electronic thermal relay |
| Efficiency | Up to 98 percent |
| Mounting | Side by side, no clearance needed between drives |
Typical Applications
The 132F0002 is a 0.37 kW member of the VLT Micro Drive FC 51 family, a compact general-purpose AC drive built for the simple speed-control jobs that make up most of a plant. It suits any three-phase asynchronous motor of matching rating that needs smooth starting, adjustable speed and energy saving in place of a direct-on-line starter, a star-delta starter or a mechanical throttle.
- Centrifugal pumps: water supply, booster sets, dosing skids and circulation loops, where reducing speed cuts absorbed power sharply
- Fans and blowers: ventilation, extraction, cooling towers, air handling units and dust collection
- Conveyors and roller tables in packaging, bottling, food processing and warehouse handling
- Mixers, agitators, augers, screw feeders and small extruders
- Compressors, machine-tool auxiliaries, saws, grinders and workshop equipment
- OEM machines where panel space is tight and side-by-side mounting is required
The drive works standalone with its built-in PI controller, so a pressure or flow transmitter can be wired straight to the analogue input and the drive will hold setpoint without any external PLC loop.
All VLT Micro Drive FC 51 Models
The full FC 51 range that Renda Trading supplies is listed below. Choose the row that matches your motor rating and supply voltage.
| Code number | Type code | Power | Supply | Current | Size |
|---|---|---|---|---|---|
| 132F0002 | FC-051PK37S2E20H | 0.37 kW | 1 x 200-240 V | 2.2 A | M1 |
| 132F0003 | FC-051PK75S2E20H | 0.75 kW | 1 x 200-240 V | 4.2 A | M1 |
| 132F0005 | FC-051P1K5S2E20H | 1.5 kW | 1 x 200-240 V | 6.8 A | M2 |
| 132F0007 | FC-051P2K2S2E20H | 2.2 kW | 1 x 200-240 V | 9.6 A | M3 |
| 132F0017 | FC-051PK37T4E20H | 0.37 kW | 3 x 380-480 V | 1.2 A | M1 |
| 132F0018 | FC-051PK75T4E20H | 0.75 kW | 3 x 380-480 V | 2.2 A | M1 |
| 132F0020 | FC-051P1K5T4E20H | 1.5 kW | 3 x 380-480 V | 3.7 A | M2 |
| 132F0022 | FC-051P2K2T4E20H | 2.2 kW | 3 x 380-480 V | 5.3 A | M2 |
| 132F0024 | FC-051P3K0T4E20H | 3 kW | 3 x 380-480 V | 7.2 A | M3 |
| 132F0026 | FC-051P4K0T4E20H | 4 kW | 3 x 380-480 V | 9.0 A | M3 |
| 132F0028 | FC-051P5K5T4E20H | 5.5 kW | 3 x 380-480 V | 12.0 A | M3 |
| 132F0030 | FC-051P7K5T4E20H | 7.5 kW | 3 x 380-480 V | 15.5 A | M3 |
| 132F0058 | FC-051P11KT4E20H | 11 kW | 3 x 380-480 V | 23 A | M4 |
| 132F0059 | FC-051P15KT4E20H | 15 kW | 3 x 380-480 V | 31 A | M4 |
| 132F0060 | FC-051P18KT4E20H | 18.5 kW | 3 x 380-480 V | 37 A | M5 |
| 132F0061 | FC-051P22KT4E20H | 22 kW | 3 x 380-480 V | 43 A | M5 |
Control Panels and Accessories
The VLT Micro Drive FC 51 is delivered without a local control panel, so the keypad is ordered as a separate item. Both panels below fit every size in the range.
| Code number | Item | Description |
|---|---|---|
| 132B0100 | LCP 11 | Numerical local control panel without potentiometer |
| 132B0101 | LCP 12 | Numerical local control panel with potentiometer |
Other accessories available on request: IP21 / NEMA Type 1 conversion kit, decoupling plate for EMC-correct cable termination, DIN rail mounting kit for the smaller sizes, braking resistors for units with a brake chopper, and MCT 10 set-up software for PC commissioning.
Frequently Asked Questions
What is Danfoss 132F0002?
Danfoss 132F0002 is a VLT Micro Drive FC 51 frequency converter rated 0.37 kW, type code FC-051PK37S2E20H. It is supplied for a 1 x 200-240 V supply with a rated output current of 2.2 A and comes in the M1 enclosure.
What supply voltage does 132F0002 need?
It is built for 1 x 200-240 V, 50/60 Hz. The output to the motor is three-phase 0-230 V with an output frequency range of 0 to 200 Hz.
What size motor can 132F0002 drive?
It is rated for a 0.37 kW three-phase asynchronous motor with a rated current up to 2.2 A. It delivers 150 % overload torque for 60 seconds, which covers normal starting of pumps, fans, conveyors and mixers.
Does 132F0002 have a built-in brake chopper?
No. The integrated brake chopper is fitted from 1.5 kW upwards, so this 0.37 kW unit does not have one. For quick stopping use DC braking or ramp-down control instead.
Is a control panel included with 132F0002?
No. The drive is shipped without a keypad. Order LCP 11 (132B0100) without potentiometer or LCP 12 (132B0101) with potentiometer, or commission the drive from a PC using MCT 10 software.
What is the enclosure and protection rating of 132F0002?
The unit is enclosure size M1, 150 mm high x 70 mm wide x 148 mm deep, weighing about 1.1 kg. Protection is IP20 as standard, and an IP21/NEMA Type 1 conversion kit is available.
Can FC 51 drives be mounted side by side?
Yes. The VLT Micro Drive FC 51 is designed for side-by-side installation with no clearance between units, which keeps control panels compact. Keep the specified free space above and below for cooling air.
How do I order 132F0002 from Renda Trading?
Send the code number 132F0002 or the type code FC-051PK37S2E20H with the quantity you need and we will reply with price, stock and delivery time. Include the motor rating and supply voltage if you are unsure which size is correct.
Ordering 132F0002 from Renda Trading
Renda Trading Company supplies Danfoss VLT drives and accessories to industrial customers in Saudi Arabia and the wider Gulf region. Prices are quoted per order because they depend on quantity, delivery time and the rest of the items on your request.
To get a quotation, send us the code number 132F0002 and the quantity you need. If you are not certain that this is the right size, tell us the motor nameplate rating, the supply voltage on site and what the motor drives, and we will confirm the correct model before you order.
- Danfoss code number: 132F0002
- Type code: FC-051PK37S2E20H
- Brand: Danfoss
- Family: VLT Micro Drive FC 51
- Availability: contact us for current stock and lead time
