The SICK GS6-D4311 is a through-beam photoelectric sender from the SICK G6 series, SICK part number 2058059. It has a sensing range of 0 m to 10 m, up to 15 m, a sender output and an M8 4-pin plug. The housing measures just 12 x 31.5 x 21 mm, runs on 10 to 30 V DC and is rated IP67.
This is the sender half of a through-beam pair. It emits the beam that a matching GE6 or GSE6 receiver watches. The sender has no switching output of its own, so it needs only power, and it uses the same 12 x 31.5 x 21 mm housing and the same mounting as the receiver.
The G6 body is the reason this family is fitted so widely. At 12 mm wide it goes where a standard sensor will not, the two through-holes take an M3 screw or the standard SICK brackets, and the whole series shares the same mounting pattern, so a diffuse, a retro-reflective and a through-beam version can be swapped on the same fixture without redrilling anything.
The M8 4-pin plug version is the one to choose when the sensor has to be changed quickly during production: unplug, unscrew, replace, and the machine runs again. It also keeps the cabinet wiring tidy because the cable is a separate standard item.
Technical specifications
| Brand | SICK |
|---|---|
| SICK part number | 2058059 |
| رمز الموديل | GS6-D4311 |
| Product family | SICK G6 |
| Product type | Through-beam photoelectric sender, used with a GE6 receiver |
| Sensing range | 0 m to 10 m, up to 15 m |
| Reflector required | No reflector needed |
| Light source | PinPoint LED, visible red light, 650 nm |
| Switching output | Sender, no switching output |
| Adjustment | None |
| Supply voltage | 10 V DC to 30 V DC |
| Current consumption | 30 mA without load |
| التوصيل الكهربائي | Male connector M8, 4-pin |
| Enclosure rating | IP67 |
| Ambient operating temperature | -25 to +55 degrees C |
| Storage temperature | -40 to +70 degrees C |
| Housing material | Plastic, ABS/PC |
| Front screen material | Plastic, PMMA |
| Dimensions (W x H x D) | 12 mm x 31.5 mm x 21 mm |
| الوزن | 40 g |
| Protection class | III |
| Circuit protection | Reverse polarity, short-circuit and interference pulse protected |
What the GS6-D4311 is used for
- Part presence and position checks on assembly, packaging and bottling machines
- Counting and gap detection on conveyors
- End position and jam detection on feeders, pushers and diverters
- Label, carton and tray detection on packaging lines
- Machine guarding interlocks and simple presence checks where a safety device is not required
- Long distances and dirty environments, where the through-beam has the light margin to keep working
Frequently asked questions
What does the type code GS6-D4311 mean?
SICK builds the G6 code from the sensing principle and the electrical version. GS6 is the principle: GTB6 is background suppression, GTB6L the laser version of it, GTE6 energetic diffuse, GL6 retro-reflective, GL6G retro-reflective for clear objects, GL6L the laser version, GSE6 a through-beam pair, GE6 a through-beam receiver and GS6 a through-beam sender. In the block after the dash, D marks the sender, and the first digit is the connection: 1 for a 2 m cable and 4 for an M8 4-pin plug. This unit is male connector m8, 4-pin.
Is the output NPN or PNP, and does it matter?
The GS6 is a sender and has no switching output at all, so the question does not apply. The output type is decided by the receiver you pair it with.
What is supplied with a through-beam set?
A through-beam application always needs two units, a sender and a receiver, facing each other. The GS6 is the sender only; it needs a matching GE6 receiver opposite it. Tell us if you need the pair and we will quote both. Both halves use the same housing and the same mounting.
How far can the GS6-D4311 detect?
The rated sensing range is 0 m to 10 m, up to 15 m. Real range depends on the target: a matt black surface returns far less light than white card, and dust, spray or a dirty lens all cut into the margin. Size the sensor so the working distance is comfortably inside the rated range rather than at its limit.
Can it be used in a washdown or dusty area?
The G6 is rated IP67, which covers dust and temporary immersion, and the housing is ABS/PC with a PMMA front screen. It handles a normal factory environment, including packaging and bottling lines. It is not rated for high pressure washdown, aggressive chemicals or continuous immersion; for those SICK offers stainless steel and IP69K families and we can quote those instead.
Is this a genuine SICK sensor?
Yes. RendatSP supplies new original SICK parts in factory packaging. This item is type code GS6-D4311, SICK part number 2058059. The technical data on this page is taken from the official SICK datasheet for this model, and we can send you that datasheet before you order.
Do you ship to Iraq, Saudi Arabia and other Arab markets?
Yes. We ship worldwide from our warehouses and we have local agents in 11 countries, including Saudi Arabia, Iraq, the United Arab Emirates, Egypt, Oman, Libya, Morocco, Mauritania, Yemen, Algeria and Jordan. Send us the type code and the quantity and we will quote delivery to your city.
All SICK GS6 models we supply
Every version of the GS6 in the SICK standard range, with the official SICK part number where it is published.
| Model | SICK part number | Output | Connection |
|---|---|---|---|
| GS6-D1311 | On request | Sender, no switching output | Cable, 3-wire, 2 m |
| GS6-D4311 (this page) | 2058059 | Sender, no switching output | Male connector M8, 4-pin |
The rest of the SICK G6 family
The SICK G6 family covers five sensing principles in the same 12 x 31.5 x 21 mm housing, so the mounting and the wiring stay the same whichever one the application needs.
- SICK GTB6 — photoelectric proximity sensor with background suppression, 35 mm to 140 mm, up to 250 mm on highly reflective targets, 14 models
- SICK GTB6L — laser photoelectric proximity sensor with background suppression, 30 mm to 180 mm, up to 400 mm, 4 models
- SICK GTE6 — energetic photoelectric proximity sensor, 15 mm to 250 mm, up to 300 mm on highly reflective targets, 11 models
- SICK GL6 — retro-reflective photoelectric sensor, 0.07 m to 5 m with a PL80A reflector, 17 models
- SICK GL6G — retro-reflective photoelectric sensor for transparent objects, 0.07 m to 5 m with a PL80A reflector, 8 models
- SICK GL6L — laser retro-reflective photoelectric sensor, 0.08 m to 10 m with a P250F reflector, up to 12 m, 1 models
- SICK GSE6 — through-beam photoelectric sensor, 0 m to 10 m, up to 15 m, 14 models
- SICK GE6 — through-beam photoelectric receiver, 0 m to 10 m, up to 15 m, 4 models
- SICK GS6 — through-beam photoelectric sender, 0 m to 10 m, up to 15 m, 2 models (this family)
A side by side comparison of all 75 models is on our SICK G6 sensor selection guide.
Reflectors, cables and brackets
The parts most often ordered together with a SICK G6 sensor are listed below. Send us the type code and we will quote the matching items in the same offer.
- Reflectors PL80A, PL40A and P250F for the retro-reflective models
- Connecting cables with an M8 4-pin socket, straight or angled, 2 m and 5 m
- Mounting brackets and rod mounts for the G6 housing
- The matching sender or receiver where a through-beam pair is being built
- Protective covers and front screen cleaning kits for dusty lines
Ordering and delivery
RendatSP supplies genuine SICK GS6-D4311 sensors, SICK part number 2058059, new and in original packaging. Prices are quoted on request because they depend on quantity and destination. Send the type code and the quantity through the order form on this page, by email to info@rendatsp.com, or on WhatsApp at +86 181 5871 1787, and we normally reply with a price and a delivery time within 24 hours.
We hold more than 100,000 industrial spare parts on request, serve over 500 factories, and ship worldwide with local agents in Saudi Arabia, Iraq, the United Arab Emirates, Egypt, Oman, Libya, Morocco, Mauritania, Yemen, Algeria and Jordan. If a sensor on your machine has failed and you are not sure of the code, send a photo of the label and our engineers will identify it.
