,

صمام Festo MHE3-M1H-3/2G-QS-6-K الكهرومغناطيسي (525152)

صمام كهرومغناطيسي هوائي أصلي من Festo موديل MHE3-M1H-3/2G-QS-6-K، سريع الاستجابة، ‏3/2 مغلق في وضع السكون، رقم الصنف 525152. تدفق 200 لتر/دقيقة، وصلة سريعة QS-6 ( مم)، 6 mm, 2.5 m cable، 24 فولت DC، درجة حماية IP65. جديد وأصلي بتغليف المصنع.

رمز المنتج: MHE3-M1H-3/2G-QS-6-K التصنيفات: , العلامة التجارية:

The Festo MHE3-M1H-3/2G-QS-6-K, Festo part number 525152, is a directly actuated 3/2-way, single solenoid, normally closed solenoid valve from the Festo MHE3 fast-switching series. It has a standard nominal flow rate of 200 لتر/دقيقة, QS-6 push-in, 6 mm pneumatic connections, a cable, 2.5 m (pur sheath) electrical connection and runs on 24 فولت DC. Switching time is 8.3 ms on and 4.5 ms off, with a maximum switching frequency of 130 Hz.

The valve body is only 14 mm wide, so valves can be mounted side by side on a 19 mm grid to build a compact bank. The design is a pressure-relief poppet valve with a mechanical spring return and a non-detenting manual override, in a coated die-cast zinc housing rated IP65.

Technical specifications

Brand Festo
رقم صنف Festo 525152
رمز الموديل MHE3-M1H-3/2G-QS-6-K
Series MHE3 fast-switching solenoid valves
وظيفة الصمام 3/2-way, single solenoid, normally closed
Design Pressure-relief poppet valve, direct piloting
Type of reset Mechanical spring
التدفق الاسمي القياسي 200 لتر/دقيقة
المقاس الاسمي 3 مم
عرض الجسم 14 مم
المسافة بين محاور الصمامات 19 مم
وصلة الهواء QS-6 push-in, 6 mm (all ports)
ضغط التشغيل -0.09 MPa to 0.8 MPa (-0.9 to 8 bar)
جهد التشغيل 24 V DC ±10%
Power consumption 3.7 W (24 V DC)
Duty cycle 100%
Switching time, on / off 8.3 / 4.5 مللي ثانية
Max. switching frequency 130 هرتز
التوصيل الكهربائي Cable, 2.5 m (PUR sheath)
Manual override Non-detenting
Additional functions None (standard coil)
Degree of protection IP65
Operating medium Compressed air to ISO 8573-1:2010 [7:4:4]
Media and ambient temperature -5 °C to +60 °C
Mounting position Any
Housing material Die-cast zinc, coated
Seal material HNBR, NBR
الوزن 120 غم
Conformity CE marking, UKCA marking, RoHS, LABS-conform (VDMA 24364)
Condition New and original, factory packaged

Typical applications

Handling and assembly equipment, pick-and-place units, sorting and ejection systems, blow-off and air-knife circuits, textile machinery, packaging and filling lines, laboratory and medical devices — anywhere a short cycle time and a compact valve footprint matter.

Frequently asked questions

Is the Festo 525152 normally open or normally closed?

It is normally closed (closed at rest, opens when energised).

What is the difference between the Festo M1H and MS1H versions?

The MS1H versions carry integrated electronics: holding-current reduction, spark arresting and a protective circuit. They switch much faster and tolerate far higher switching frequencies. On the MHE3, MS1H switches in about 2.3 ms at up to 280 Hz, while the standard M1H coil switches in about 8.3 ms at up to 130 Hz. The M1H is the simpler and cheaper option where speed is not critical. This item is the M1H version.

What does the -K at the end of a Festo MHE part number mean?

The -K suffix means the valve is supplied with a fixed 2.5 m PUR cable instead of a 2-pin plug. This item is the -K cable version.

Can the Festo MHE3-M1H-3/2G-QS-6-K be used with vacuum?

Yes. The operating pressure range starts at -0.09 MPa (-0.9 bar), so the valve can switch vacuum as well as compressed air. For reversed flow direction the pressure range is limited to -0.09 to 0.1 MPa.

What power supply does it need?

24 V DC, ±10%. Power consumption is 3.7 W (24 V DC) at a 100% duty cycle.

Is this a genuine Festo part?

Yes. RendatSP supplies new, original, factory-packaged Festo parts. Part number 525152 is the official Festo order number for the MHE3-M1H-3/2G-QS-6-K.

All Festo MHE3 models we supply

The MHE3 family shares the same body (14 mm wide, 200 l/min). The models differ in valve function, port type and electrical connection. The current item is shown in bold. If you are not sure which model fits your machine, see our Festo MHE solenoid valve selection guide.

رقم الصنف رمز الموديل الوظيفة Ports Electrical
525146 MHE3-M1H-3/2G-1/8 ‏3/2، مغلق في وضع السكون G1/8 قابس ثنائي الأطراف
525147 MHE3-MS1H-3/2G-1/8 ‏3/2، مغلق في وضع السكون G1/8 قابس ثنائي الأطراف
525148 MHE3-M1H-3/2G-1/8-K ‏3/2، مغلق في وضع السكون G1/8 كابل 2.5 متر
525149 MHE3-MS1H-3/2G-1/8-K ‏3/2، مغلق في وضع السكون G1/8 كابل 2.5 متر
525152 MHE3-M1H-3/2G-QS-6-K ‏3/2، مغلق في وضع السكون وصلة سريعة QS-6، 6 مم كابل 2.5 متر
525153 MHE3-MS1H-3/2G-QS-6-K ‏3/2، مغلق في وضع السكون وصلة سريعة QS-6، 6 مم كابل 2.5 متر
525171 MHE3-MS1H-3/2O-QS-6 ‏3/2، مفتوح في وضع السكون وصلة سريعة QS-6، 6 مم قابس ثنائي الأطراف

This is the -K version with a fixed 2.5 m cable, so no separate plug socket is needed.

Ordering and delivery

RendatSP supplies Festo pneumatic spare parts to maintenance teams, machine builders and industrial distributors across Saudi Arabia, Iraq, the UAE, Egypt, Oman, Libya, Morocco, Mauritania and Yemen. Parts are shipped from our stock in China by air or sea. Send us the part number and the quantity you need and we will reply with a price and a delivery time.

الوزن 0.120 كيلوجرام
Brand

Festo

Festo Part Number

525152

Type Code

MHE3-M1H-3/2G-QS-6-K

Series

MHE3

Valve Function

3/2-way, single solenoid, normally closed

Pneumatic Connection

وصلة سريعة QS-6، 6 مم

Electrical Connection

كابل 2.5 متر

Operating Voltage

24 فولت DC

Nominal Flow Rate

200 لتر/دقيقة

Switching Time

8.3 / 4.5 مللي ثانية

Degree of Protection

IP65

Scroll to Top