The Festo MHE3-MS1H-3/2G-1/8, Festo part number 525147, is a directly actuated 3/2-way, single solenoid, normally closed solenoid valve from the Festo MHE3 fast-switching series. It has a standard nominal flow rate of 200 لتر/دقيقة, G1/8 pneumatic connections, a 2-pin plug electrical connection and runs on 24 فولت DC. Switching time is 2.3 ms on and 2.8 ms off, with a maximum switching frequency of 280 Hz.
The valve body is only 14 mm wide, so valves can be mounted side by side on a 19 mm grid to build a compact bank. The design is a pressure-relief poppet valve with a mechanical spring return and a non-detenting manual override, in a coated die-cast zinc housing rated IP65.
Technical specifications
| Brand | Festo |
|---|---|
| رقم صنف Festo | 525147 |
| رمز الموديل | MHE3-MS1H-3/2G-1/8 |
| Series | MHE3 fast-switching solenoid valves |
| وظيفة الصمام | 3/2-way, single solenoid, normally closed |
| Design | Pressure-relief poppet valve, direct piloting |
| Type of reset | Mechanical spring |
| التدفق الاسمي القياسي | 200 لتر/دقيقة |
| المقاس الاسمي | 3 مم |
| عرض الجسم | 14 مم |
| المسافة بين محاور الصمامات | 19 مم |
| وصلة الهواء | G1/8 (all ports) |
| ضغط التشغيل | -0.09 MPa to 0.8 MPa (-0.9 to 8 bar) |
| جهد التشغيل | 24 V DC ±10% |
| Power consumption | 1.6 W holding / 6.5 W pull-in (24 V DC) |
| Duty cycle | 100% |
| Switching time, on / off | 2.3 / 2.8 مللي ثانية |
| Max. switching frequency | 280 هرتز |
| التوصيل الكهربائي | قابس ثنائي الأطراف |
| Manual override | Non-detenting |
| Additional functions | Spark arresting, holding-current reduction, protective circuit, bipolar reverse polarity protection |
| Degree of protection | IP65 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Media and ambient temperature | -5 °C to +60 °C |
| Mounting position | Any |
| Housing material | Die-cast zinc, coated |
| Seal material | HNBR, NBR |
| الوزن | 120 غم |
| Conformity | CE marking, UKCA marking, RoHS, LABS-conform (VDMA 24364) |
| Condition | New and original, factory packaged |
Typical applications
Handling and assembly equipment, pick-and-place units, sorting and ejection systems, blow-off and air-knife circuits, textile machinery, packaging and filling lines, laboratory and medical devices — anywhere a short cycle time and a compact valve footprint matter.
Frequently asked questions
Is the Festo 525147 normally open or normally closed?
It is normally closed (closed at rest, opens when energised).
What is the difference between the Festo M1H and MS1H versions?
The MS1H versions carry integrated electronics: holding-current reduction, spark arresting and a protective circuit. They switch much faster and tolerate far higher switching frequencies. On the MHE3, MS1H switches in about 2.3 ms at up to 280 Hz, while the standard M1H coil switches in about 8.3 ms at up to 130 Hz. The M1H is the simpler and cheaper option where speed is not critical. This item is the MS1H version.
What does the -K at the end of a Festo MHE part number mean?
The -K suffix means the valve is supplied with a fixed 2.5 m PUR cable instead of a 2-pin plug. This item is the plug version, so you also need a plug socket with cable such as the Festo KMYZ-4-24-2.5-B (193691), the KMEB-1-24-2.5-LED (151688) with LED, or the NEBV-Z4WA2L-P-E-2.5-N-LE2-S1 (8047671).
Can the Festo MHE3-MS1H-3/2G-1/8 be used with vacuum?
Yes. The operating pressure range starts at -0.09 MPa (-0.9 bar), so the valve can switch vacuum as well as compressed air. For reversed flow direction the pressure range is limited to -0.09 to 0.1 MPa.
What power supply does it need?
24 V DC, ±10%. Power consumption is 1.6 W holding / 6.5 W pull-in (24 V DC) at a 100% duty cycle. Because of holding-current reduction, the high figure applies only during the pull-in phase.
Is this a genuine Festo part?
Yes. RendatSP supplies new, original, factory-packaged Festo parts. Part number 525147 is the official Festo order number for the MHE3-MS1H-3/2G-1/8.
All Festo MHE3 models we supply
The MHE3 family shares the same body (14 mm wide, 200 l/min). The models differ in valve function, port type and electrical connection. The current item is shown in bold. If you are not sure which model fits your machine, see our Festo MHE solenoid valve selection guide.
| رقم الصنف | رمز الموديل | الوظيفة | Ports | Electrical |
|---|---|---|---|---|
| 525146 | MHE3-M1H-3/2G-1/8 | 3/2، مغلق في وضع السكون | G1/8 | قابس ثنائي الأطراف |
| 525147 | MHE3-MS1H-3/2G-1/8 | 3/2، مغلق في وضع السكون | G1/8 | قابس ثنائي الأطراف |
| 525148 | MHE3-M1H-3/2G-1/8-K | 3/2، مغلق في وضع السكون | G1/8 | كابل 2.5 متر |
| 525149 | MHE3-MS1H-3/2G-1/8-K | 3/2، مغلق في وضع السكون | G1/8 | كابل 2.5 متر |
| 525152 | MHE3-M1H-3/2G-QS-6-K | 3/2، مغلق في وضع السكون | وصلة سريعة QS-6، 6 مم | كابل 2.5 متر |
| 525153 | MHE3-MS1H-3/2G-QS-6-K | 3/2، مغلق في وضع السكون | وصلة سريعة QS-6، 6 مم | كابل 2.5 متر |
| 525171 | MHE3-MS1H-3/2O-QS-6 | 3/2، مفتوح في وضع السكون | وصلة سريعة QS-6، 6 مم | قابس ثنائي الأطراف |
Matching cable for this valve
This is the plug version, so it needs a plug socket with cable. We supply three options: the Festo NEBV-Z4WA2L-P-E-2.5-N-LE2-S1 (8047671) with LED and protective circuit, IP65; the Festo KMEB-1-24-2.5-LED (151688) with LED and protective conductor, IP65; and the basic Festo KMYZ-4-24-2.5-B (193691) without LED, IP40.
Ordering and delivery
RendatSP supplies Festo pneumatic spare parts to maintenance teams, machine builders and industrial distributors across Saudi Arabia, Iraq, the UAE, Egypt, Oman, Libya, Morocco, Mauritania and Yemen. Parts are shipped from our stock in China by air or sea. Send us the part number and the quantity you need and we will reply with a price and a delivery time.
