Genuine Panasonic MBDLN25SE (MINAS A6S Series Servo Driver): MINAS A6 Servo Driver, A6SE, B-Frame, Position Control Type, Single/3-phase 200 V.
MINAS A6 servo systems combine a high-resolution encoder motor with a fast servo driver; motor and driver must match in power and voltage.
More Panasonic sensors, PLCs and servo parts: Panasonic range.
Technical data
| Model | MBDLN25SE |
|---|---|
| Series | A6SE series |
| Type | Position control type |
| Frame | B-Frame |
| Frequency response (kHz) | 3.2 |
| Control method | Position control |
| Safety Function | without |
| Supply voltage | Single/3-phase 200 V |
| I/F Classification of type | Pulse train only |
| Dimensions (W) (Unit: mm) | 55 |
| Dimensions (H) (Unit: mm) | 150 |
| Dimensions (D) (Unit: mm) | 130 |
| Mass (kg) | 1.0 |
| Environment | For more details, please refer to the instruction manual. |
| Input power: Main circuit | Single/3-phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Input power: Control circuit | Single phase 200 V (+10% -15%) to 240 V (+10% -15%) 50/60 Hz |
| Encoder feedback | 23-bit (8388608 resolution) absolute encoder, 7-wire serial |
| Parallel I/O connector: Control signal Input | General purpose 10 inputs The function of general-purpose input is selected by parameters. |
| Parallel I/O connector: Control signal Output | General purpose 6 output The function of general-purpose output is selected by parameters. |
| Parallel I/O connector: Analog signal Output | 2 outputs (Analog monitor: 2 output) |
| Parallel I/O connector: Pulse signal Input | 2 inputs (Photo-coupler input, Line receiver input) |
| Parallel I/O connector: Pulse signal Output | 4 outputs (Line driver: 3 output, open collector: 1 output) |
| Communication function | USB |
| Communication function: USB | USB interface to connect to computers for parameter setting or status monitoring. |
| Regeneration | No built-in regenerative resistor (external resistor only) |
| Control mode | Switching among the following 3 mode is enabled, (1) Position control, (2) Internal velocity command, (3) Position/Internal velocity command |
| Brand | Panasonic |
| Condition | New, original |
Main characteristics
- Product details: A6SE series Position control type (Incremental system only, Pulse train only) without the safety function
- Communication function: USB
Typical applications
- Electronic component mounting
- Machine tools and indexing tables
- Robots and handling systems
- Replacement of an existing MINAS A6 unit
- Positioning axes in packaging and assembly machines
Compatibility and replacement
Order with the complete Panasonic part number MBDLN25SE; in MINAS A6 codes the characters set the rated output, voltage and encoder, plus brake, oil seal and shaft for motors or frame, interface and safety function for drivers, so check the nameplate of the old unit.
The values in the table come from the official Panasonic Industry product data; if your old unit shows different values, send us a photo of its label and we will check it.
Before you replace it
- Brake, oil seal and shaft type (motors)
- Rated output (W) and voltage
- Interface and safety function (drivers)
Frequently asked questions
What supply voltage does it need?
Single/3-phase 200 V, according to the Panasonic product data.
Can I get the datasheet?
The official manufacturer data is the source of the technical values above; we can send the datasheet with the quotation on request.
How fast can you deliver, and is there a warranty?
Air shipping usually takes 5 to 7 days once the part is ready, to almost any country. Each part is new and original with a 1-year warranty. Message us on WhatsApp with the order number for a quotation.
Before you order
Compare the complete order number on the old unit with this page, including the suffix: in most ranges the last characters set the coil voltage, current range or version. If the label is worn, send us a photo and we will identify the part.
Every part RendatSP supplies is new and original, carries a 1-year warranty and ships worldwide by air in 5 to 7 days once ready (shipping, payment and warranty). Send us the order number and quantity on WhatsApp or through the inquiry form and we will quote the same working day. Agents in Saudi Arabia, Iraq, the UAE, Egypt, Oman, Libya, Morocco, Mauritania, Yemen, Algeria and Jordan.
