The Airtac TCM12X60S is a double-acting tri-rod guided cylinder from the AirTAC TCL/TCM series with a 12 mm bore and 60 mm stroke. The piston rod and two guide rods are tied to one front plate, and the guides run in brass/bronze slide bearings (M), so the plate resists turning and side load without an external guide.
Reading the code: TC = tri-rod cylinder (double acting), M = brass bearing, 12×60 = bore x stroke in mm, S = with magnet (every TC cylinder has one, for position sensing); no thread suffix means the standard port thread.
Technical data
| Airtac model | TCM12X60S |
|---|---|
| Series | TCL/TCM tri-rod guided cylinder |
| Bearing type | Brass bearing (TCM) |
| Bore | 12 mm |
| Stroke | 60 mm (max. standard stroke for this bore: 150 mm) |
| Acting type | Double acting |
| Magnet | Yes (S) |
| Operating pressure | 0.15-1.0 MPa (22-145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Fluid | Air, filtered by a 40 µm filter element |
| Temperature | -20 to 70 °C |
| Speed range | 30-500 mm/s |
| Cushion | Bumper |
| Stroke tolerance | +1.0/0 mm up to 100 mm stroke, +1.5/0 mm above 100 mm |
| Non-rotating accuracy (retracted) | ±0.10° |
| Max. safe torque at this stroke | 0.49 N·m |
| Port size | M5x0.8 |
| Theoretical push force at 0.5 MPa | approx. 56.5 N (calculated: bore area x pressure) |
| Condition | New original, factory packaged |
| Origin | Made in China (Airtac International Group) |
Typical applications
- Small lift tables and indexing fixtures
- Press-fit, clamping and lifting stations on assembly machines
- Positioning of sensors, cameras and tooling plates
- Gate, diverter and reject mechanisms on packaging lines
- Like-for-like replacement of an Airtac TCM12X60S
Compatibility and replacement
The TCL and TCM versions of the same bore and stroke share the ordering code layout; TCL guides run in linear ball bearings, TCM guides in brass slide bearings, and AirTAC lists tighter non-rotating accuracy and different safe-torque values for each. Port threads other than the standard are ordered with a suffix (for example T for NPT). When replacing an existing unit, match bore, stroke, bearing letter and the thread suffix printed on the old cylinder label.
Frequently asked questions
Should I choose TCM12X60S or the TCL version?
TCM (brass bearing) is what you have here. Per AirTAC, the non-rotating accuracy of this bore is ±0.10° for TCM and ±0.08° for TCL. Check the safe-torque table for your stroke as well; when replacing a cylinder, keep the bearing letter on the old label so the machine behaves the same.
How much load can the plate carry?
AirTAC rates the maximum safe torque of the TCM12 at 60 mm stroke at 0.49 N·m. Allowable load mass falls as stroke and speed increase; the catalog load graphs are based on 400 mm/s, so size the cylinder with spare capacity and check eccentric loads.
What air supply does it need?
Clean compressed air filtered to 40 µm, between 0.15-1.0 MPa (22-145 psi). The M5x0.8 ports take standard push-in fittings of that thread.
Related parts
- Airtac TCL12X60S TCL Compact Cylinder
- Airtac TCM12X50S TCM Compact Cylinder (Non-rotating)
- Airtac TCM12X75S TCM Compact Cylinder (Non-rotating)
- All TCL/TCM Compact Cylinders
Common spare part for machines already running Airtac pneumatic components. Tell us the quantity and destination country and we will confirm stock and lead time.
Every part RendatSP supplies is new and original, carries a 1-year warranty and ships worldwide by air in 5 to 7 days once ready (shipping, payment and warranty). Send us the part number and quantity on WhatsApp or through the inquiry form and we will quote the same working day. Agents in Saudi Arabia, Iraq, the UAE, Egypt, Oman, Libya, Morocco, Mauritania, Yemen, Algeria and Jordan.
