The Airtac TCL32X80S is a double-acting tri-rod guided cylinder from the AirTAC TCL\/TCM series with a 32 mm bore and 80 mm stroke. The piston rod and two guide rods are tied to one front plate, and the guides run in linear ball bearings (L), so the plate resists turning and side load without an external guide.<\/p>\n
Reading the code: TC<\/strong> = tri-rod cylinder (double acting), L<\/strong> = linear bearing, 32×80<\/strong> = bore x stroke in mm, S<\/strong> = with magnet (every TC cylinder has one, for position sensing); no thread suffix means the standard port thread.<\/p>\n The TCL and TCM versions of the same bore and stroke share the ordering code layout; TCL guides run in linear ball bearings, TCM guides in brass slide bearings, and AirTAC lists tighter non-rotating accuracy and different safe-torque values for each. Port threads other than the standard are ordered with a suffix (for example T for NPT). When replacing an existing unit, match bore, stroke, bearing letter and the thread suffix printed on the old cylinder label.<\/p>\n TCL (linear bearing) is what you have here. Per AirTAC, the non-rotating accuracy of this bore is \u00b10.06\u00b0 for TCL and \u00b10.08\u00b0 for TCM. Check the safe-torque table for your stroke as well; when replacing a cylinder, keep the bearing letter on the old label so the machine behaves the same.<\/p>\n AirTAC gives a speed range of 30-500 mm\/s for this bore, with bumper cushioning. Use speed-control fittings to set the speed and keep impact at the stroke ends low.<\/p>\n AirTAC rates the maximum safe torque of the TCL32 at 80 mm stroke at 5.02 N\u00b7m. Allowable load mass falls as stroke and speed increase; the catalog load graphs are based on 400 mm\/s, so size the cylinder with spare capacity and check eccentric loads.<\/p>\n Common spare part for machines already running Airtac pneumatic components. Tell us the quantity and destination country and we will confirm stock and lead time.<\/p>\nTechnical data<\/h3>\n
\n\n
\n Airtac model<\/th>\n TCL32X80S<\/td>\n<\/tr>\n \n Series<\/th>\n TCL\/TCM tri-rod guided cylinder<\/td>\n<\/tr>\n \n Bearing type<\/th>\n Linear ball bearing (TCL)<\/td>\n<\/tr>\n \n Bore<\/th>\n 32 mm<\/td>\n<\/tr>\n \n Stroke<\/th>\n 80 mm (max. standard stroke for this bore: 250 mm)<\/td>\n<\/tr>\n \n Acting type<\/th>\n Double acting<\/td>\n<\/tr>\n \n Magnet<\/th>\n Yes (S)<\/td>\n<\/tr>\n \n \u0636\u063a\u0637 \u0627\u0644\u062a\u0634\u063a\u064a\u0644<\/th>\n 0.15-1.0 MPa (22-145 psi)<\/td>\n<\/tr>\n \n Proof pressure<\/th>\n 1.5 MPa (215 psi)<\/td>\n<\/tr>\n \n Fluid<\/th>\n Air, filtered by a 40 \u00b5m filter element<\/td>\n<\/tr>\n \n Temperature<\/th>\n -20 to 70 \u00b0C<\/td>\n<\/tr>\n \n Speed range<\/th>\n 30-500 mm\/s<\/td>\n<\/tr>\n \n Cushion<\/th>\n Bumper<\/td>\n<\/tr>\n \n Stroke tolerance<\/th>\n +1.0\/0 mm up to 100 mm stroke, +1.5\/0 mm above 100 mm<\/td>\n<\/tr>\n \n Non-rotating accuracy (retracted)<\/th>\n \u00b10.06\u00b0<\/td>\n<\/tr>\n \n Max. safe torque at this stroke<\/th>\n 5.02 N\u00b7m<\/td>\n<\/tr>\n \n Port size<\/th>\n 1\/8″<\/td>\n<\/tr>\n \n Theoretical push force at 0.5 MPa<\/th>\n approx. 402.1 N (calculated: bore area x pressure)<\/td>\n<\/tr>\n \n Condition<\/th>\n New original, factory packaged<\/td>\n<\/tr>\n \n Origin<\/th>\n Made in China (Airtac International Group)<\/td>\n<\/tr>\n<\/tbody>\n<\/table>\n Typical applications<\/h3>\n
\n
Compatibility and replacement<\/h3>\n
Frequently asked questions<\/h3>\n
Should I choose TCL32X80S or the TCM version?<\/h4>\n
How fast can it run?<\/h4>\n
How much load can the plate carry?<\/h4>\n
Related parts<\/h3>\n
\n