,

Siemens 6SL3210-1KE18-8UF1 SINAMICS G120C Inverter 4 kW (8.8 A, 400V 3AC, PROFINET)

تواصل معنا للسعر

Genuine Siemens 6SL3210-1KE18-8UF1, SINAMICS G120C compact inverter, 4 kW / 8.8 A (LO), 3 AC 380-480 V, frame size FSA, PROFINET, EtherNet/IP. New original Siemens, supplied by RendatSP with worldwide shipping.

رمز المنتج: 6SL3210-1KE18-8UF1 التصنيفات: , العلامة التجارية:
1اطلب عرض سعر3

1تحتاج هذه القطعة؟3 6SL3210-1KE18-8UF1

1أرسل لنا رقم القطعة والكمية، وفريقنا الناطق بالعربية والإنجليزية يرد عليك بالسعر وحالة التوفر ومدة التوريد، عادةً خلال ساعات.3
1الكمية3
    1قطع أصلية بتغليف المصنع فقط3 1عرض سعر خلال ساعات، بالعربية أو الإنجليزية3 1شحن جوي أو بحري لكل دول العالم: الدول العربية وأفريقيا والأمريكتين وأوروبا3

1أو راسلنا على3 info@rendatsp.com · +86 181 5871 1787

The Siemens 6SL3210-1KE18-8UF1 is a SINAMICS G120C compact inverter rated 4 kW (5 hp) at 8.8 A for low overload, for a 3-phase 380 … 480 V supply, with PROFINET, EtherNet/IP communication.

Per the Siemens data sheet the drive is unfiltered, has an efficiency of 0.97 and efficiency class IE2 to IEC 61800-9-2, and a power loss of 119.0 W.

G120C drives are commissioned with an optional BOP-2 or IOP-2 operator panel or with Startdrive in TIA Portal, and integrate directly into SIMATIC S7-1200 and S7-1500 networks.

Compare other sizes in our G120C range.

Technical data

Siemens order number 6SL3210-1KE18-8UF1
Product family SINAMICS G120C compact inverter
Input 3 AC, 380 … 480 V +10 % -20 %
Line frequency 47 … 63 Hz
Input current (LO / HO) 11.4 A / 10.6 A
Output voltage 400V IEC | 480V NEC
Rated power (LO) 4 kW / 5 hp
Rated power (HO) 3 kW / 4 hp
Rated output current (LO) 8.8 A
Rated output current (HO) 7.3 A
Max. output current 14.6 A
Standard digital inputs 6
Fail-safe digital inputs 1
Analog / digital inputs 1 (Differential input)
Analog outputs 1 (Non-isolated output)
Relay outputs (changeover) 1
Transistor outputs 1
Digital output rating (resistive) DC 30 V, 0.5 A
Pulse frequency 4 kHz
Output frequency, vector control 0 … 240 Hz
Output frequency, V/f control 0 … 550 Hz
Power factor 0.70 … 0.85
Efficiency 0.97
Efficiency class (IEC 61800-9-2) IE2
Power loss 119.0 W
Sound pressure level (1 m) 52 dB
Filter class (integrated) Unfiltered
Communication PROFINET, EtherNet/IP
Cooling Air cooling using an integrated fan
Cooling air requirement 0.005 m³/s (0.177 ft³/s)
Installation altitude (without derating) 1,000 m (3,280.84 ft)
Ambient temperature (operation) -10 … 40 °C (14 … 104 °F)
Storage temperature -25 … 55 °C (-13 … 131 °F)
Max. motor cable length, shielded 150 m (492.13 ft)
Max. motor cable length, unshielded 150 m (492.13 ft)
Line/motor terminals Plug-in screw terminals
Line-side conductor cross-section 1.00 … 2.50 mm² (AWG 18 … AWG 14)
Degree of protection IP20 / UL open type
Frame size FSA
Net weight 1.70 kg (3.75 lb)
Dimensions (W x H x D) 73 mm x 196 mm x 200 mm
Standards CE, cUL, UL, KC, EAC, C-Tick (RCM)
Condition New, original Siemens

Where it is used

  • Pumps, fans and compressors
  • Conveyors and material handling
  • Hoists and lifting gear (with braking resistor)

Compatibility and replacement

This G120C has PROFINET, EtherNet/IP on board; other G120C versions exist for USS/Modbus RTU and PROFIBUS, so check the fieldbus on the old drive. Operator panels BOP-2 (6SL3255-0AA00-4CA1) and IOP-2 (6SL3255-0AA00-4JA2) fit the G120C and are ordered separately.

Before you replace it

  • Compare the full order number 6SL3210-1KE18-8UF1 with the rating plate of the old drive; the letters after the power code identify supply, filter and fieldbus version.
  • Save or write down the parameters of the old drive if it still powers up; an operator panel can copy them.
  • Check ventilation and cabinet temperature: drives derate or trip when the cabinet is too hot.

Frequently asked questions

LO or HO: which rating applies?

Low overload (4 kW, 8.8 A) suits pumps and fans; high overload (3 kW, 7.3 A) suits conveyors and machines with heavy starting torque.

Is an operator panel included?

No. Add a BOP-2 or IOP-2, or commission it with Startdrive in TIA Portal.

Which fieldbus does it have?

Per the Siemens data sheet: PROFINET, EtherNet/IP.

How fast can you deliver, and is there a warranty?

Air shipping usually takes 5 to 7 days once the part is ready, to almost any country. Each part is new and original with a 1-year warranty. Message us on WhatsApp with the order number for a quotation.

RendatSP ships from Yiwu, China, to factories worldwide; air delivery usually takes 5 to 7 days once the part is ready. The part is new and original with a 1-year warranty (shipping, payment and warranty). For a quotation, message us on WhatsApp with the order number and quantity. We also have agents in Saudi Arabia, Iraq, the UAE, Egypt, Oman, Libya, Morocco, Mauritania, Yemen, Algeria and Jordan.

Scroll to Top