Siemens 6ES7332-5HF00-0AB0 (SIMATIC S7-300): SIMATIC S7-300, analog output SM 332, isolated, 8 AO, U/I; diagnostics; resolution 11/12 bits, 40-pole, removing and inserting with active backplane bus possible.
Many plants keep their S7-300 lines running while planning a migration to S7-1500; an exact like-for-like spare avoids changing the hardware configuration in STEP 7 / TIA Portal.
See our Siemens range.
Siemens lists this order number as a spare part, which means it is still supplied for existing installations while newer versions exist for new projects. We supply the exact order number for like-for-like replacement and can quote the current version too.
Technical data
| Siemens order number | 6ES7332-5HF00-0AB0 |
|---|---|
| Analog outputs | 8 |
| Resolution incl. sign | 12 bit; ±10 V, ±20 mA, 4 mA to 20 mA, 1 V to 5 V: 11 bit + sign; 0 V to 10 V, 0 |
| Power loss, typ. | 6W |
| Dimensions (W x H x D) | 40 x 125 x 117 mm |
| Weight, approx. | 0.272 kg |
| Condition | New, original Siemens |
Main features
- SIMATIC S7-300
- Analog output SM 332
- Isolated
- 8 AO
- U/I
- Diagnostics
- Resolution 11/12 bits
- 40-pole
- Removing and inserting with active backplane bus possible
Typical applications
- Keeping an installed S7-300 system running before migration
- Replacing a failed CPU, I/O or power supply module
- Machine and process-line controllers
- Spare-part stock for maintenance teams
Compatibility and replacement
Use exactly the same order number when possible, because the hardware configuration in STEP 7 or TIA Portal refers to it. Check the firmware version of a CPU on the label of the old unit; if a newer version is supplied, it can normally replace the older one, but confirm with your hardware configuration.
Before you replace it
- Look for signs of overvoltage, water or heat damage in the cabinet so the new part does not fail for the same reason.
- Back up the program and parameters from the old device if it still runs.
- Check the supply voltage and wiring of the old unit before installing the new one.
Frequently asked questions
Which software is used?
STEP 7 (SIMATIC Manager) or TIA Portal, depending on the version used for the existing project.
Does it need a front connector?
Signal modules use a separate 20-pin or 40-pin front connector (6ES7392-…), which is ordered separately unless it is the item itself.
Is it new and original?
Yes. We supply new, original parts in the manufacturer packaging, with a 1-year warranty.
Can you help me identify the right replacement?
Yes. Send us a photo of the label of the old part, or its full order number, and we will confirm the exact match or the official successor before quoting.
Can I get a price and delivery time?
Prices are quoted on request. Send the order number, quantity and delivery country on WhatsApp and we will reply with price and delivery time; air shipping is usually 5 to 7 days once ready, with a 1-year warranty.
Before you order
Compare the complete order number on the old unit with this page, including the suffix: in most ranges the last characters set the coil voltage, current range or version. If the label is worn, send us a photo and we will identify the part.
Every part RendatSP supplies is new and original, carries a 1-year warranty and ships worldwide by air in 5 to 7 days once ready (shipping, payment and warranty). Send us the order number and quantity on WhatsApp or through the inquiry form and we will quote the same working day. Agents in Saudi Arabia, Iraq, the UAE, Egypt, Oman, Libya, Morocco, Mauritania, Yemen, Algeria and Jordan.
