The Siemens 6ES7332-5HD01-0AB0 is described by Siemens as: SIMATIC S7-300, analog output SM 332, isolated, 4 AO, U/I; diagnostics; resolution 11/12 bits, 20-pole, removing and inserting with active backplane bus possible.
S7-300 modules are among the most replaced automation spares: keeping an identical module in stock lets maintenance swap a failed card in minutes and reload or keep the existing program.
See our Siemens range.
Siemens lists this order number as a spare part, which means it is still supplied for existing installations while newer versions exist for new projects. We supply the exact order number for like-for-like replacement and can quote the current version too.
Technical data
| Siemens order number | 6ES7332-5HD01-0AB0 |
|---|---|
| Analog outputs | 4 |
| Resolution incl. sign | 12 bit; ±10 V, ±20 mA, 4 mA to 20 mA, 1 V to 5 V: 11 bit + sign; 0 V to 10 V, 0 |
| Power loss, typ. | 3W |
| Dimensions (W x H x D) | 40 x 125 x 117 mm |
| Weight, approx. | 0.22 kg |
| Condition | New, original Siemens |
Features at a glance
- SIMATIC S7-300
- Analog output SM 332
- Isolated
- 4 AO
- U/I
- Diagnostics
- Resolution 11/12 bits
- 20-pole
- Removing and inserting with active backplane bus possible
Typical applications
- Replacing a failed CPU, I/O or power supply module
- Spare-part stock for maintenance teams
- Machine and process-line controllers
- Keeping an installed S7-300 system running before migration
Compatibility and replacement
Use exactly the same order number when possible, because the hardware configuration in STEP 7 or TIA Portal refers to it. Check the firmware version of a CPU on the label of the old unit; if a newer version is supplied, it can normally replace the older one, but confirm with your hardware configuration.
Replacement checklist
- Check the mounting (DIN rail or screw fixing) and the terminal type (screw or spring-loaded) of the old unit.
- Check the supply voltage and wiring of the old unit before installing the new one.
- Compare the full order number 6ES7332-5HD01-0AB0 with the label on the old unit, including the last digits (they identify the version).
Frequently asked questions
Does it need a front connector?
Signal modules use a separate 20-pin or 40-pin front connector (6ES7392-…), which is ordered separately unless it is the item itself.
Which software is used?
STEP 7 (SIMATIC Manager) or TIA Portal, depending on the version used for the existing project.
Can I get a datasheet?
The official manufacturer datasheet is the source of the technical data above; we can send the PDF with the quotation on request.
Can you help me identify the right replacement?
Yes. Send us a photo of the label of the old part, or its full order number, and we will confirm the exact match or the official successor before quoting.
Can I get a price and delivery time?
Prices are quoted on request. Send the order number, quantity and delivery country on WhatsApp and we will reply with price and delivery time; air shipping is usually 5 to 7 days once ready, with a 1-year warranty.
Before you order
Compare the complete order number on the old unit with this page, including the suffix: in most ranges the last characters set the coil voltage, current range or version. If the label is worn, send us a photo and we will identify the part.
Need it fast? Send the order number, quantity and delivery country on WhatsApp or through the inquiry form and we reply with a quotation the same working day. All parts are new and original, covered by a 1-year warranty, and ship worldwide by air in 5 to 7 days once ready (shipping, payment and warranty). Local agents: Saudi Arabia, Iraq, the UAE, Egypt, Oman, Libya, Morocco, Mauritania, Yemen, Algeria and Jordan.
