SICK GSE2S-P1311, part number 1064362, is a through-beam photoelectric sensor from the SICK G2 family in the G2 Slim housing. It has a PNP switching output set to light switching, a sensing range of 0 m … 2 m and is connected by cable, 3-wire, 2 m. Renda Trading Company supplies it as a genuine SICK part.
A through-beam arrangement gives the longest range and the most reliable detection of the three photoelectric principles, because the object simply has to break a beam. Colour, surface and transparency of the object matter far less. This part number is the receiver unit; the matching G2 sender is ordered separately.
The G2 Slim housing measures 7.7 mm x 21.8 mm x 13.5 mm, so the sensor fits into the narrow gaps of packaging machines, small handling units, assembly cells and vending or banking machines where a standard sensor will not go. Protection is IP67 and the electronics are reverse-polarity protected, short-circuit protected and interference suppressed.
Technical Data
| Brand | SICK |
|---|---|
| رمز الموديل | GSE2S-P1311 |
| SICK part number | 1064362 |
| Product family | G2 (G2 Slim) |
| Functional principle | Through-beam photoelectric sensor |
| Functional principle detail | Receiver unit, matching G2 sender ordered separately |
| Sensing range max. | 0 m … 2 m |
| Sensing range | 0 m … 1.5 m |
| Type of light | Visible red light |
| Light source | PinPoint LED |
| Wavelength | 640 nm |
| Light spot size (distance) | diameter 23 mm at 500 mm |
| Adjustment | None |
| Switching output | PNP |
| Switching mode | Light switching |
| Supply voltage | 10 V DC … 30 V DC |
| Current consumption | 20 mA (without load) |
| Output current | max. 50 mA |
| Response time | < 0.6 ms |
| Switching frequency | 800 Hz |
| Connection type | Cable, 3-wire, 2 m |
| Dimensions (W x H x D) | 7.7 mm x 21.8 mm x 13.5 mm |
| الوزن | 72.2 g |
| Housing material | Plastic, ABS |
| Optics material | Plastic, PMMA |
| Enclosure rating | IP67 |
| Ambient operating temperature | -25 °C … +50 °C |
| Circuit protection | Reverse polarity, short-circuit and overcurrent protected, interference suppressed |
How to Read the Type Code GSE2S-P1311
SICK builds the G2 type code from the sensing principle, the housing and the wiring, so once the pattern is clear any part number in the family can be read at a glance.
- GSE2S identifies the sensing principle and the housing. GTB is background suppression, GTE is energetic proximity, GL is retro-reflective and GSE is a through-beam receiver. The digit 2 is the G2 family, and the final letter is the housing: S for G2 Slim and F for G2 Flat.
- P is the output: PNP output, light switching. P and N are light switching, F and E are the dark-switching versions of the same electronics.
- 1 is the electrical connection: cable, 3-wire, 2 m.
- The last three digits are the SICK device version, which fixes the sensing range and the optical set-up. On this model that is 311.
The number that matters when ordering is the SICK part number, 1064362, because it identifies exactly one article.
Typical Applications
SICK GSE2S-P1311 is used wherever a small, dependable switching signal is needed in a space that will not take a standard sensor. Common jobs include:
- The most reliable detection of dark, shiny, uneven or perforated objects, because only the beam matters
- Long or dirty conveyor sections where a reflector would need constant cleaning
- Counting and gap control on fast product streams
- Detection through openings and past machine frames, using the beam as a light barrier
- Applications with heavy ambient light or steam, where beam interruption is the only dependable method
The PNP output makes it easy to wire into the digital inputs of the usual PLCs. PNP is the normal choice for European and Gulf-built control panels with sinking inputs. In light switching the output is on when the sensor sees the object (or, on a through-beam or retro-reflective sensor, when the beam is clear).
Other GSE2S Models
Every GSE2S version that Renda Trading supplies is listed below. The electronics are the same across a range group; only the output, the switching mode and the connection change.
| رمز الموديل | Part no. | Sensing range max. | Output | Switching mode | Connection |
|---|---|---|---|---|---|
| GSE2S-E5311 | 1064366 | 0 m … 2 m | NPN | Dark switching | Male connector M8, 3-pin, 200 mm cable |
| GSE2S-E1311 | 1063070 | 0 m … 2 m | NPN | Dark switching | Cable, 3-wire, 2 m |
| GSE2S-F5311 | 1063072 | 0 m … 2 m | PNP | Dark switching | Male connector M8, 3-pin, 200 mm cable |
| GSE2S-F1311 | 1064363 | 0 m … 2 m | PNP | Dark switching | Cable, 3-wire, 2 m |
| GSE2S-N1311 | 1064365 | 0 m … 2 m | NPN | Light switching | Cable, 3-wire, 2 m |
| GSE2S-N2311 | 1089006 | 0 m … 2 m | NPN | Light/dark switching | Cable, 4-wire, 2 m |
| GSE2S-P5311 | 1064364 | 0 m … 2 m | PNP | Light switching | Male connector M8, 3-pin, 200 mm cable |
| GSE2S-P1311 | 1064362 | 0 m … 2 m | PNP | Light switching | Cable, 3-wire, 2 m |
| GSE2S-P2311 | 1121697 | 0 m … 2 m | PNP | Light/dark switching | Cable, 4-wire, 2 m |
The Rest of the SICK G2 Family
The G2 family covers four sensing principles in two miniature housings. If this model is not the right principle for your job, the others are on the site:
- GTB2S background suppression, G2 Slim housing
- GTB2F background suppression, G2 Flat housing
- GTE2F energetic proximity, G2 Flat housing
- GL2S retro-reflective, G2 Slim housing
- GSE2S through-beam, G2 Slim housing (this page)
Frequently Asked Questions
What is SICK GSE2S-P1311?
SICK GSE2S-P1311, part number 1064362, is a G2 miniature photoelectric sensor in the G2 Slim housing. Its functional principle is a through-beam receiver, the sensing range is 0 m … 2 m, the output is PNP with light switching, and the connection is cable, 3-wire, 2 m.
What is the sensing range of GSE2S-P1311?
The maximum sensing range is 0 m … 2 m. The reliable working range quoted by SICK is 0 m … 1.5 m.
Is GSE2S-P1311 PNP or NPN?
It has a PNP switching output. PNP switches the positive line to the input, which is what most European and Gulf control panels expect. SICK offers the same sensor with the opposite output under a different type code, so check the model table on this page before ordering.
Is GSE2S-P1311 light switching or dark switching?
Light switching. The output is active when the receiver sees light.
How is GSE2S-P1311 connected?
The connection is cable, 3-wire, 2 m. Supply voltage is 10 V DC to 30 V DC with a current consumption of about 20 mA, and the output can drive up to 50 mA. The outputs are short-circuit and overcurrent protected and the supply is reverse-polarity protected.
What are the dimensions of GSE2S-P1311?
The G2 Slim housing measures 7.7 mm x 21.8 mm x 13.5 mm (W x H x D) and the sensor weighs about 72.2 g. Enclosure rating is IP67 and the operating temperature range is -25 °C … +50 °C.
Do I need a separate sender for GSE2S-P1311?
Yes. GSE2S-P1311 is the receiver of a through-beam pair. The matching G2 sender is ordered separately, and we supply it with the receiver on request. Tell us how you want the sender connected, by cable or by M8 plug, and we will quote the matching pair.
Is GSE2S-P1311 a genuine SICK product?
Yes. Renda Trading Company supplies original SICK sensors with SICK part numbers. The data on this page is taken from the official SICK data sheet for GSE2S-P1311, part number 1064362.
How do I order GSE2S-P1311 from Renda Trading?
Send us the type code GSE2S-P1311 or the part number 1064362 with the quantity you need and we will reply with price, availability and delivery time. If you are replacing a failed sensor, send a photo of the label and we will confirm the exact model.
Ordering SICK GSE2S-P1311 from Renda Trading
Renda Trading Company supplies genuine SICK sensors to factories and machine builders in Saudi Arabia, Iraq, the UAE and the wider Arab region. We quote per enquiry, because price depends on quantity and delivery time.
- Type code: GSE2S-P1311
- SICK part number: 1064362
- Brand: SICK
- Family: G2 miniature photoelectric sensors, G2 Slim housing
- Availability: contact us for current stock and lead time
Send the part number and quantity and we will come back with a quotation. If you are unsure which version you need, tell us the object you have to detect, the distance, the space available and whether your controller needs PNP or NPN, and we will confirm the right model first.
