SICK GL2S-E5311, part number 1064361, is a retro-reflective photoelectric sensor from the SICK G2 family in the G2 Slim housing. It has a NPN switching output set to dark switching, a sensing range of 0.02 m … 3 m and is connected by male connector m8, 3-pin, 200 mm cable. Renda Trading Company supplies it as a genuine SICK part.
A retro-reflective sensor puts the emitter and the receiver in one housing and works against a reflector mounted opposite. That gives it far more range than a proximity sensor while still needing power and wiring on one side only. The polarisation filter lets it detect shiny and film-wrapped objects without being fooled by their own reflections. A PL10F reflector is supplied with the sensor.
The G2 Slim housing measures 7.7 mm x 21.8 mm x 13.5 mm, so the sensor fits into the narrow gaps of packaging machines, small handling units, assembly cells and vending or banking machines where a standard sensor will not go. Protection is IP67 and the electronics are reverse-polarity protected, short-circuit protected and interference suppressed.
Technical Data
| Brand | SICK |
|---|---|
| رمز الموديل | GL2S-E5311 |
| SICK part number | 1064361 |
| Product family | G2 (G2 Slim) |
| Functional principle | Retro-reflective photoelectric sensor |
| Functional principle detail | Autocollimation, with polarisation filter |
| Sensing range max. | 0.02 m … 3 m |
| Sensing range | 0.03 m … 2.5 m with PL40A reflector |
| Type of light | Visible red light |
| Light source | PinPoint LED |
| Wavelength | 640 nm |
| Light spot size (distance) | diameter 11 mm at 250 mm |
| Adjustment | None |
| Switching output | NPN |
| Switching mode | Dark switching |
| Supply voltage | 10 V DC … 30 V DC |
| Current consumption | 20 mA (without load) |
| Output current | max. 50 mA |
| Response time | < 0.6 ms |
| Switching frequency | 800 Hz |
| Connection type | Male connector M8, 3-pin, 200 mm cable |
| Dimensions (W x H x D) | 7.7 mm x 21.8 mm x 13.5 mm |
| Housing material | Plastic, ABS |
| Optics material | Plastic, PMMA |
| Enclosure rating | IP67 |
| Ambient operating temperature | -25 °C … +50 °C |
| Circuit protection | Reverse polarity, short-circuit and overcurrent protected, interference suppressed |
| Items supplied | PL10F reflector |
How to Read the Type Code GL2S-E5311
SICK builds the G2 type code from the sensing principle, the housing and the wiring, so once the pattern is clear any part number in the family can be read at a glance.
- GL2S identifies the sensing principle and the housing. GTB is background suppression, GTE is energetic proximity, GL is retro-reflective and GSE is a through-beam receiver. The digit 2 is the G2 family, and the final letter is the housing: S for G2 Slim and F for G2 Flat.
- E is the output: NPN output, dark switching. P and N are light switching, F and E are the dark-switching versions of the same electronics.
- 5 is the electrical connection: male connector M8, 3-pin on a 200 mm cable.
- The last three digits are the SICK device version, which fixes the sensing range and the optical set-up. On this model that is 311.
The number that matters when ordering is the SICK part number, 1064361, because it identifies exactly one article.
Typical Applications
SICK GL2S-E5311 is used wherever a small, dependable switching signal is needed in a space that will not take a standard sensor. Common jobs include:
- Conveyors and transfer lines where the sensor and reflector can face each other across the track
- Detection of shiny, film-wrapped and transparent-taped packs, thanks to the polarisation filter
- Pallet, box and tote detection at distances up to 3 m
- Door, gate and shutter position control
- Bottling and canning lines where a proximity sensor would be confused by reflections
The NPN output makes it easy to wire into the digital inputs of the usual PLCs. NPN is the normal choice for Japanese and many Chinese machine controls with sourcing inputs. In dark switching the output is on when the object is absent, or when the beam is interrupted.
Other GL2S Models
Every GL2S version that Renda Trading supplies is listed below. The electronics are the same across a range group; only the output, the switching mode and the connection change.
| رمز الموديل | Part no. | Sensing range max. | Output | Switching mode | Connection |
|---|---|---|---|---|---|
| GL2S-E5311 | 1064361 | 0.02 m … 3 m | NPN | Dark switching | Male connector M8, 3-pin, 200 mm cable |
| GL2S-E1311 | 1063009 | 0.02 m … 3 m | NPN | Dark switching | Cable, 3-wire, 2 m |
| GL2S-F5311 | 1063008 | 0.02 m … 3 m | PNP | Dark switching | Male connector M8, 3-pin, 200 mm cable |
| GL2S-F1311 | 1064358 | 0.02 m … 3 m | PNP | Dark switching | Cable, 3-wire, 2 m |
| GL2S-N1311 | 1064360 | 0.02 m … 3 m | NPN | Light switching | Cable, 3-wire, 2 m |
| GL2S-N2311 | 1067404 | 0.02 m … 3 m | NPN | Light/dark switching | Cable, 4-wire, 2 m |
| GL2S-P5311 | 1064359 | 0.02 m … 3 m | PNP | Light switching | Male connector M8, 3-pin, 200 mm cable |
| GL2S-P1311 | 1064357 | 0.02 m … 3 m | PNP | Light switching | Cable, 3-wire, 2 m |
The Rest of the SICK G2 Family
The G2 family covers four sensing principles in two miniature housings. If this model is not the right principle for your job, the others are on the site:
- GTB2S background suppression, G2 Slim housing
- GTB2F background suppression, G2 Flat housing
- GTE2F energetic proximity, G2 Flat housing
- GL2S retro-reflective, G2 Slim housing (this page)
- GSE2S through-beam, G2 Slim housing
Frequently Asked Questions
What is SICK GL2S-E5311?
SICK GL2S-E5311, part number 1064361, is a G2 miniature photoelectric sensor in the G2 Slim housing. Its functional principle is autocollimation, with polarisation filter, the sensing range is 0.02 m … 3 m, the output is NPN with dark switching, and the connection is male connector m8, 3-pin, 200 mm cable.
What is the sensing range of GL2S-E5311?
The maximum sensing range is 0.02 m … 3 m. The reliable working range quoted by SICK is 0.03 m … 2.5 m with PL40A reflector.
Is GL2S-E5311 PNP or NPN?
It has a NPN switching output. NPN switches the negative line to the input, which is what many Japanese and Chinese machine controls expect. SICK offers the same sensor with the opposite output under a different type code, so check the model table on this page before ordering.
Is GL2S-E5311 light switching or dark switching?
Dark switching. The output is active when the receiver does not see light.
How is GL2S-E5311 connected?
The connection is male connector m8, 3-pin, 200 mm cable. Supply voltage is 10 V DC to 30 V DC with a current consumption of about 20 mA, and the output can drive up to 50 mA. The outputs are short-circuit and overcurrent protected and the supply is reverse-polarity protected.
What are the dimensions of GL2S-E5311?
The G2 Slim housing measures 7.7 mm x 21.8 mm x 13.5 mm (W x H x D). Enclosure rating is IP67 and the operating temperature range is -25 °C … +50 °C.
Which reflector does GL2S-E5311 need?
A PL10F reflector is supplied with the sensor. The maximum range of 0.02 m … 3 m is stated with a PL40A reflector; a larger reflector gives more range and more tolerance to alignment, while a small one keeps the installation compact. The polarisation filter allows shiny and film-wrapped objects to be detected without false switching.
Is GL2S-E5311 a genuine SICK product?
Yes. Renda Trading Company supplies original SICK sensors with SICK part numbers. The data on this page is taken from the official SICK data sheet for GL2S-E5311, part number 1064361.
How do I order GL2S-E5311 from Renda Trading?
Send us the type code GL2S-E5311 or the part number 1064361 with the quantity you need and we will reply with price, availability and delivery time. If you are replacing a failed sensor, send a photo of the label and we will confirm the exact model.
Ordering SICK GL2S-E5311 from Renda Trading
Renda Trading Company supplies genuine SICK sensors to factories and machine builders in Saudi Arabia, Iraq, the UAE and the wider Arab region. We quote per enquiry, because price depends on quantity and delivery time.
- Type code: GL2S-E5311
- SICK part number: 1064361
- Brand: SICK
- Family: G2 miniature photoelectric sensors, G2 Slim housing
- Availability: contact us for current stock and lead time
Send the part number and quantity and we will come back with a quotation. If you are unsure which version you need, tell us the object you have to detect, the distance, the space available and whether your controller needs PNP or NPN, and we will confirm the right model first.
