,

Panasonic MADLN11SE MINAS A6 Servo Driver, A6SE, A-Frame, Position Control Type, Single phase 100 V

تواصل معنا للسعر

Genuine Panasonic MADLN11SE – MINAS A6 Servo Driver, A6SE, A-Frame, Position Control Type, Single phase 100 V. New original Panasonic part, supplied by RendatSP with worldwide shipping.

رمز المنتج: MADLN11SE التصنيفات: , العلامة التجارية:
1اطلب عرض سعر3

1تحتاج هذه القطعة؟3 MADLN11SE

1أرسل لنا رقم القطعة والكمية، وفريقنا الناطق بالعربية والإنجليزية يرد عليك بالسعر وحالة التوفر ومدة التوريد، عادةً خلال ساعات.3
1الكمية3
    1قطع أصلية بتغليف المصنع فقط3 1عرض سعر خلال ساعات، بالعربية أو الإنجليزية3 1شحن جوي أو بحري لكل دول العالم: الدول العربية وأفريقيا والأمريكتين وأوروبا3

1أو راسلنا على3 info@rendatsp.com · +86 181 5871 1787

Genuine Panasonic MADLN11SE (MINAS A6S Series Servo Driver): MINAS A6 Servo Driver, A6SE, A-Frame, Position Control Type, Single phase 100 V.

The MINAS A6 family covers motors from 50 W upwards with 23-bit absolute encoders; the drivers offer real-time auto-tuning and vibration suppression.

More Panasonic sensors, PLCs and servo parts: Panasonic range.

Technical data

Model MADLN11SE
Series A6SE series
Type Position control type
Frame A-Frame
Frequency response (kHz) 3.2
Control method Position control
Safety Function without
Supply voltage Single phase 100 V
I/F Classification of type Pulse train only
Dimensions (W) (Unit: mm) 40
Dimensions (H) (Unit: mm) 150
Dimensions (D) (Unit: mm) 130
Mass (kg) 0.8
Environment For more details, please refer to the instruction manual.
Input power: Main circuit Single phase 100 V (+10% -15%) to 120 V (+10% -15%) 50/60 Hz
Input power: Control circuit Single phase 100 V (+10% -15%) to 120 V (+10% -15%) 50/60 Hz
Encoder feedback 23-bit (8388608 resolution) absolute encoder, 7-wire serial
Parallel I/O connector: Control signal Input General purpose 10 inputs The function of general-purpose input is selected by parameters.
Parallel I/O connector: Control signal Output General purpose 6 output The function of general-purpose output is selected by parameters.
Parallel I/O connector: Analog signal Output 2 outputs (Analog monitor: 2 output)
Parallel I/O connector: Pulse signal Input 2 inputs (Photo-coupler input, Line receiver input)
Parallel I/O connector: Pulse signal Output 4 outputs (Line driver: 3 output, open collector: 1 output)
Communication function USB
Communication function: USB USB interface to connect to computers for parameter setting or status monitoring.
Regeneration No built-in regenerative resistor (external resistor only)
Control mode Switching among the following 3 mode is enabled, (1) Position control, (2) Internal velocity command, (3) Position/Internal velocity command
Brand Panasonic
Condition New, original

At a glance

  • Product details: A6SE series Position control type (Incremental system only, Pulse train only) without the safety function
  • Communication function: USB

Typical applications

  • Positioning axes in packaging and assembly machines
  • Robots and handling systems
  • Machine tools and indexing tables
  • Electronic component mounting
  • Replacement of an existing MINAS A6 unit

Compatibility and replacement

Order with the complete Panasonic part number MADLN11SE; in MINAS A6 codes the characters set the rated output, voltage and encoder, plus brake, oil seal and shaft for motors or frame, interface and safety function for drivers, so check the nameplate of the old unit.

If the label of the old part is worn or the model is discontinued, send us a photo and we will confirm the current Panasonic equivalent before quoting.

What to check first

  • Encoder type
  • Rated output (W) and voltage
  • Brake, oil seal and shaft type (motors)

Frequently asked questions

What supply voltage does it need?

Single phase 100 V, according to the Panasonic product data.

Can I get the datasheet?

The official manufacturer data is the source of the technical values above; we can send the datasheet with the quotation on request.

Do you ship to my country, and what is the warranty?

Yes. RendatSP ships worldwide from Yiwu, China, by air in 5 to 7 days once the part is ready, and every part carries a 1-year warranty. Send the order number and quantity on WhatsApp and we will reply with a quotation.

How to order

Message us the order number and quantity. For breakdowns, tell us the delivery address and we will offer the fastest shipping option. If the exact part is discontinued, we confirm the official successor before quoting.

Every part RendatSP supplies is new and original, carries a 1-year warranty and ships worldwide by air in 5 to 7 days once ready (shipping, payment and warranty). Send us the order number and quantity on WhatsApp or through the inquiry form and we will quote the same working day. Agents in Saudi Arabia, Iraq, the UAE, Egypt, Oman, Libya, Morocco, Mauritania, Yemen, Algeria and Jordan.

Scroll to Top