The Festo MHE4-MS1H-3/2G-1/4-K, Festo part number 525189, is a directly actuated 3/2-way, single solenoid, normally closed solenoid valve from the Festo MHE4 fast-switching series. It has a standard nominal flow rate of 400 لتر/دقيقة, G1/4 pneumatic connections, a cable, 2.5 m (pur sheath) electrical connection and runs on 24 فولت DC. Switching time is 3.5 ms on and 3.5 ms off, with a maximum switching frequency of 210 Hz.
The valve body is only 18 mm wide, so valves can be mounted side by side on a 24 mm grid to build a compact bank. The design is a pressure-relief poppet valve with a mechanical spring return and a non-detenting manual override, in a coated die-cast zinc housing rated IP65.
Technical specifications
| Brand | Festo |
|---|---|
| رقم صنف Festo | 525189 |
| رمز الموديل | MHE4-MS1H-3/2G-1/4-K |
| Series | MHE4 fast-switching solenoid valves |
| وظيفة الصمام | 3/2-way, single solenoid, normally closed |
| Design | Pressure-relief poppet valve, direct piloting |
| Type of reset | Mechanical spring |
| التدفق الاسمي القياسي | 400 لتر/دقيقة |
| المقاس الاسمي | 4 مم |
| عرض الجسم | 18 مم |
| المسافة بين محاور الصمامات | 24 مم |
| وصلة الهواء | G1/4 (all ports) |
| ضغط التشغيل | -0.09 MPa to 0.8 MPa (-0.9 to 8 bar) |
| جهد التشغيل | 24 V DC ±10% |
| Power consumption | 2.125 W holding / 8.5 W pull-in (24 V DC) |
| Duty cycle | 100% |
| Switching time, on / off | 3.5 / 3.5 مللي ثانية |
| Max. switching frequency | 210 هرتز |
| التوصيل الكهربائي | Cable, 2.5 m (PUR sheath) |
| Manual override | Non-detenting |
| Additional functions | Spark arresting, holding-current reduction, protective circuit, bipolar reverse polarity protection |
| Degree of protection | IP65 |
| Operating medium | Compressed air to ISO 8573-1:2010 [7:4:4] |
| Media and ambient temperature | -5 °C to +60 °C |
| Mounting position | Any |
| Housing material | Die-cast zinc, coated |
| Seal material | HNBR, NBR |
| الوزن | 270 غم |
| Conformity | CE marking, UKCA marking, RoHS, LABS-conform (VDMA 24364) |
| Condition | New and original, factory packaged |
Typical applications
Handling and assembly equipment, pick-and-place units, sorting and ejection systems, blow-off and air-knife circuits, textile machinery, packaging and filling lines, laboratory and medical devices — anywhere a short cycle time and a compact valve footprint matter.
Frequently asked questions
Is the Festo 525189 normally open or normally closed?
It is normally closed (closed at rest, opens when energised).
What is the difference between the Festo M1H and MS1H versions?
The MS1H versions carry integrated electronics: holding-current reduction, spark arresting and a protective circuit. They switch much faster and tolerate far higher switching frequencies. On the MHE4, MS1H switches in about 3.5 ms at up to 210 Hz, while the standard M1H coil switches in about 10.5 ms at up to 120 Hz. The M1H is the simpler and cheaper option where speed is not critical. This item is the MS1H version.
What does the -K at the end of a Festo MHE part number mean?
The -K suffix means the valve is supplied with a fixed 2.5 m PUR cable instead of a 2-pin plug. This item is the -K cable version.
Can the Festo MHE4-MS1H-3/2G-1/4-K be used with vacuum?
Yes. The operating pressure range starts at -0.09 MPa (-0.9 bar), so the valve can switch vacuum as well as compressed air. For reversed flow direction the pressure range is limited to -0.09 to 0.1 MPa.
What power supply does it need?
24 V DC, ±10%. Power consumption is 2.125 W holding / 8.5 W pull-in (24 V DC) at a 100% duty cycle. Because of holding-current reduction, the high figure applies only during the pull-in phase.
Is this a genuine Festo part?
Yes. RendatSP supplies new, original, factory-packaged Festo parts. Part number 525189 is the official Festo order number for the MHE4-MS1H-3/2G-1/4-K.
All Festo MHE4 models we supply
The MHE4 family shares the same body (18 mm wide, 400 l/min). The models differ in valve function, port type and electrical connection. The current item is shown in bold. If you are not sure which model fits your machine, see our Festo MHE solenoid valve selection guide.
| رقم الصنف | رمز الموديل | الوظيفة | Ports | Electrical |
|---|---|---|---|---|
| 525186 | MHE4-M1H-3/2G-1/4 | 3/2، مغلق في وضع السكون | G1/4 | قابس ثنائي الأطراف |
| 525187 | MHE4-MS1H-3/2G-1/4 | 3/2، مغلق في وضع السكون | G1/4 | قابس ثنائي الأطراف |
| 525188 | MHE4-M1H-3/2G-1/4-K | 3/2، مغلق في وضع السكون | G1/4 | كابل 2.5 متر |
| 525189 | MHE4-MS1H-3/2G-1/4-K | 3/2، مغلق في وضع السكون | G1/4 | كابل 2.5 متر |
| 525193 | MHE4-MS1H-3/2G-QS-8-K | 3/2، مغلق في وضع السكون | وصلة سريعة QS-8، 8 مم | كابل 2.5 متر |
| 525207 | MHE4-MS1H-3/2O-1/4 | 3/2، مفتوح في وضع السكون | G1/4 | قابس ثنائي الأطراف |
This is the -K version with a fixed 2.5 m cable, so no separate plug socket is needed.
Ordering and delivery
RendatSP supplies Festo pneumatic spare parts to maintenance teams, machine builders and industrial distributors across Saudi Arabia, Iraq, the UAE, Egypt, Oman, Libya, Morocco, Mauritania and Yemen. Parts are shipped from our stock in China by air or sea. Send us the part number and the quantity you need and we will reply with a price and a delivery time.
