Model PR08-2DP is a genuine Autonics inductive proximity sensor (PR series, Cylindrical Inductive Proximity Sensors).
Proximity sensors are fast-moving maintenance spares: a sensor that is hit by a part, crushed by a fixture or soaked in coolant has to be replaced the same day to restart the machine, and the replacement must match the original in size, sensing distance, output and connection.
More Autonics PR models and other Autonics parts: Autonics range.
Technical data
| Autonics model | PR08-2DP |
|---|---|
| Series | PR – Cylindrical Inductive Proximity Sensors |
| Output (ordering code) | PNP Normally Open |
| Supply (ordering code) | 12-24 VDC |
| Installation | Non-flush |
| Sensing side diameter | Ø8mm |
| Sensing distance | 2mm |
| Hysteresis(distance) | Max. 10% of sensing distance |
| Standard sensing target | 8×8×1mm(iron) |
| Response frequency | 1kHz |
| Indicator | Operation indicator (red LED) |
| Unit weight (packaged weight) | ≈ 52 g (≈ 64 g) |
| Power voltage | 12 – 24 VDC(ripple P-P: ≤ 10 %), operating voltage: 10 – 30 VDC |
| Current specification | Current consumption: Max. 10mA |
| Control output | ≤ 200 mA |
| Residual voltage | Max. 2V |
| Protection circuit | Surge protection circuit, output short over current protection circuit, reverse polarity protection circuit |
| Insulation resistance | ≥ 50 MΩ (500 VDC megger) |
| Dielectric strength | Between the charging part and the case: 1,500 VAC~ 50 / 60Hz for 1 min |
| Vibration | 1.0 mm amplitude at frequency of 10 to 55 Hzin each X, Y, Z direction for 2 hours |
| Shock | 500 m/s² (≈ 50 G) in each X, Y, Z direction for 3 times |
| Ambient temperature | -25 to 70 °C, storage: -30 to 80 °C (no freezing or condensation) |
| Brand | Autonics |
| Condition | New, original |
Typical applications
- Machine tools and presses
- Conveyor, packaging and palletising lines
- Replacement of a damaged sensor
- Position and end-of-stroke detection on machines
- Counting metal parts and gear teeth
Compatibility and replacement
Order with the full model code PR08-2DP: in the Autonics code the letters and digits after the series select the size, sensing distance or resolution, the output type and the supply, so a different suffix may not fit your wiring.
Compare the old unit with the technical data above (taken from the official Autonics data sheet); if anything differs, send us a photo and we will check it.
Before you replace it
- Output type (PNP or NPN) and NO/NC function
- Sensing distance
- Flush (shielded) or non-flush mounting
Frequently asked questions
What supply voltage does it need?
12 – 24 VDC(ripple P-P: ≤ 10 %), operating voltage: 10 – 30 VDC, according to the Autonics data sheet.
How is it connected?
Cable type, according to the Autonics data sheet.
Can you help me identify the right replacement?
Yes. Send us a photo of the label of the old part, or its full order code, and we will confirm the exact match or the official successor before quoting.
Do you ship to my country, and what is the warranty?
Yes. RendatSP ships worldwide from Yiwu, China, by air in 5 to 7 days once the part is ready, and every part carries a 1-year warranty. Send the order number and quantity on WhatsApp and we will reply with a quotation.
Ordering tips
Send us the full order number from the label of the old part, or a clear photo of the label, together with the quantity you need. We check the number against the current manufacturer data before we quote and tell you if there is a newer replacement.
Need it fast? Send the order number, quantity and delivery country on WhatsApp or through the inquiry form and we reply with a quotation the same working day. All parts are new and original, covered by a 1-year warranty, and ship worldwide by air in 5 to 7 days once ready (shipping, payment and warranty). Local agents: Saudi Arabia, Iraq, the UAE, Egypt, Oman, Libya, Morocco, Mauritania, Yemen, Algeria and Jordan.
