The Airtac TN16X35S is a double-acting twin-rod cylinder from the AirTAC TN series with a 16 mm bore and 35 mm stroke. Two 8 mm piston rods drive a common front plate, which gives good resistance to bending and twisting moments in a body that mounts flush from four directions.
Reading the code: TN = twin-rod cylinder (double acting), 16×35 = bore x stroke in mm, S = with magnet (the TN series is only made with a magnet). A bumper in front of the barrel lets you trim the stroke by up to 5 mm and softens the end impact.
Technical data
| Airtac model | TN16X35S |
|---|---|
| Series | TN twin-rod cylinder (AirTAC enterprise standard) |
| Bore | 16 mm (x2 pistons) |
| Piston rod diameter | 8 mm (x2) |
| Stroke | 35 mm (non-standard stroke for this bore; built on the next longer standard body per AirTAC) |
| Adjustable stroke | -5 to 0 mm (front bumper) |
| Acting type | Double acting |
| Magnet | Yes (S) |
| ضغط التشغيل | 0.15-1.0 MPa (22-145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Fluid | Air, filtered by a 40 µm filter element |
| Temperature | -20 to 70 °C |
| Speed range | 30-500 mm/s |
| Cushion | Bumper |
| Stroke tolerance | +1.0/0 mm up to 100 mm stroke, +1.5/0 mm above 100 mm |
| Non-rotating accuracy (retracted) | ±0.4° |
| Port size | M5x0.8 |
| Theoretical force at 0.5 MPa | push 201.1 N / pull 150.8 N (AirTAC thrust table) |
| Condition | New original, factory packaged |
| Origin | Made in China (Airtac International Group) |
Typical applications
- Ejectors and clamps on small assembly fixtures
- Compact pushers and stoppers where the rod must not rotate
- Test-probe and sensor positioning
- Labeling, marking and printing heads
- Like-for-like replacement of an Airtac TN16X35S
Compatibility and replacement
TN is an AirTAC enterprise-standard design. AirTAC also builds the TR twin-rod series to JIS dimensions, so a TR or another brand’s twin-rod cylinder is not automatically a drop-in replacement: check the mounting-hole pattern and plate dimensions. For a like-for-like swap order the same TN bore and stroke shown on the old label.
Frequently asked questions
How much force does it give?
Per the AirTAC thrust table, the TN16 pushes 201.1 N and pulls 150.8 N at 0.5 MPa (two pistons working together). Allow a safety margin for friction and dynamic loads.
Can I fine-tune the stroke?
Yes. The front bumper can be adjusted to shorten the stroke by 0 to 5 mm, which also cushions the end of travel.
Can I fit position sensors?
Yes. The body has magnetic-switch slots and the piston carries a magnet as standard, so magnetic cylinder switches can detect the end positions.
Related parts
- Airtac TN16X40S TN Pin Cylinder
- Airtac TN16X30S TN Pin Cylinder
- Airtac TN10X35S TN Pin Cylinder
- All TN Pin Cylinders
Common spare part for machines already running Airtac pneumatic components. Tell us the quantity and destination country and we will confirm stock and lead time.
Every part RendatSP supplies is new and original, carries a 1-year warranty and ships worldwide by air in 5 to 7 days once ready (shipping, payment and warranty). Send us the part number and quantity on WhatsApp or through the inquiry form and we will quote the same working day. Agents in Saudi Arabia, Iraq, the UAE, Egypt, Oman, Libya, Morocco, Mauritania, Yemen, Algeria and Jordan.
