The Airtac TCL63X30S is a double-acting tri-rod guided cylinder from the AirTAC TCL/TCM series with a 63 mm bore and 30 mm stroke. The piston rod and two guide rods are tied to one front plate, and the guides run in linear ball bearings (L), so the plate resists turning and side load without an external guide.
Reading the code: TC = tri-rod cylinder (double acting), L = linear bearing, 63×30 = bore x stroke in mm, S = with magnet (every TC cylinder has one, for position sensing); no thread suffix means the standard port thread.
Technical data
| Airtac model | TCL63X30S |
|---|---|
| Series | TCL/TCM tri-rod guided cylinder |
| Bearing type | Linear ball bearing (TCL) |
| Bore | 63 mm |
| Stroke | 30 mm (max. standard stroke for this bore: 250 mm) |
| Acting type | Double acting |
| Magnet | Yes (S) |
| ضغط التشغيل | 0.15-1.0 MPa (22-145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Fluid | Air, filtered by a 40 µm filter element |
| Temperature | -20 to 70 °C |
| Speed range | 30-500 mm/s |
| Cushion | Bumper |
| Stroke tolerance | +1.0/0 mm up to 100 mm stroke, +1.5/0 mm above 100 mm |
| Non-rotating accuracy (retracted) | ±0.05° |
| Max. safe torque at this stroke | 9.74 N·m |
| Port size | 1/4″ |
| Theoretical push force at 0.5 MPa | approx. 1,558.6 N (calculated: bore area x pressure) |
| Condition | New original, factory packaged |
| Origin | Made in China (Airtac International Group) |
Typical applications
- Stoppers and pushers on conveyor lines
- Positioning of sensors, cameras and tooling plates
- Pick-and-place and transfer units that need a non-rotating plate
- Gate, diverter and reject mechanisms on packaging lines
- Like-for-like replacement of an Airtac TCL63X30S
Compatibility and replacement
The TCL and TCM versions of the same bore and stroke share the ordering code layout; TCL guides run in linear ball bearings, TCM guides in brass slide bearings, and AirTAC lists tighter non-rotating accuracy and different safe-torque values for each. Port threads other than the standard are ordered with a suffix (for example T for NPT). When replacing an existing unit, match bore, stroke, bearing letter and the thread suffix printed on the old cylinder label.
Frequently asked questions
Should I choose TCL63X30S or the TCM version?
TCL (linear bearing) is what you have here. Per AirTAC, the non-rotating accuracy of this bore is ±0.05° for TCL and ±0.06° for TCM. Check the safe-torque table for your stroke as well; when replacing a cylinder, keep the bearing letter on the old label so the machine behaves the same.
How much load can the plate carry?
AirTAC rates the maximum safe torque of the TCL63 at 30 mm stroke at 9.74 N·m. Allowable load mass falls as stroke and speed increase; the catalog load graphs are based on 400 mm/s, so size the cylinder with spare capacity and check eccentric loads.
Which fittings do I need?
The ports are 1/4″; other port threads (such as NPT) carry a suffix in the order code. Use push-in or speed-control fittings of the same thread and tube size suited to the flow.
Related parts
- Airtac TCL63X25S TCL Compact Cylinder
- Airtac TCL63X40S TCL Compact Cylinder
- All TCL/TCM Compact Cylinders
Common spare part for machines already running Airtac pneumatic components. Tell us the quantity and destination country and we will confirm stock and lead time.
Every part RendatSP supplies is new and original, carries a 1-year warranty and ships worldwide by air in 5 to 7 days once ready (shipping, payment and warranty). Send us the part number and quantity on WhatsApp or through the inquiry form and we will quote the same working day. Agents in Saudi Arabia, Iraq, the UAE, Egypt, Oman, Libya, Morocco, Mauritania, Yemen, Algeria and Jordan.
