The Airtac TCL25X100S is a double-acting tri-rod guided cylinder from the AirTAC TCL/TCM series with a 25 mm bore and 100 mm stroke. The piston rod and two guide rods are tied to one front plate, and the guides run in linear ball bearings (L), so the plate resists turning and side load without an external guide.
Reading the code: TC = tri-rod cylinder (double acting), L = linear bearing, 25×100 = bore x stroke in mm, S = with magnet (every TC cylinder has one, for position sensing); no thread suffix means the standard port thread.
Technical data
| Airtac model | TCL25X100S |
|---|---|
| Series | TCL/TCM tri-rod guided cylinder |
| Bearing type | Linear ball bearing (TCL) |
| Bore | 25 mm |
| Stroke | 100 mm (max. standard stroke for this bore: 250 mm) |
| Acting type | Double acting |
| Magnet | Yes (S) |
| ضغط التشغيل | 0.15-1.0 MPa (22-145 psi) |
| Proof pressure | 1.5 MPa (215 psi) |
| Fluid | Air, filtered by a 40 µm filter element |
| Temperature | -20 to 70 °C |
| Speed range | 30-500 mm/s |
| Cushion | Bumper |
| Stroke tolerance | +1.0/0 mm up to 100 mm stroke, +1.5/0 mm above 100 mm |
| Non-rotating accuracy (retracted) | ±0.07° |
| Max. safe torque at this stroke | 1.97 N·m |
| Port size | 1/8″ |
| Theoretical push force at 0.5 MPa | approx. 245.4 N (calculated: bore area x pressure) |
| Condition | New original, factory packaged |
| Origin | Made in China (Airtac International Group) |
Typical applications
- Positioning of sensors, cameras and tooling plates
- Gate, diverter and reject mechanisms on packaging lines
- Stoppers and pushers on conveyor lines
- Small lift tables and indexing fixtures
- Like-for-like replacement of an Airtac TCL25X100S
Compatibility and replacement
The TCL and TCM versions of the same bore and stroke share the ordering code layout; TCL guides run in linear ball bearings, TCM guides in brass slide bearings, and AirTAC lists tighter non-rotating accuracy and different safe-torque values for each. Port threads other than the standard are ordered with a suffix (for example T for NPT). When replacing an existing unit, match bore, stroke, bearing letter and the thread suffix printed on the old cylinder label.
Frequently asked questions
Should I choose TCL25X100S or the TCM version?
TCL (linear bearing) is what you have here. Per AirTAC, the non-rotating accuracy of this bore is ±0.07° for TCL and ±0.09° for TCM. Check the safe-torque table for your stroke as well; when replacing a cylinder, keep the bearing letter on the old label so the machine behaves the same.
Is TCL25X100S a standard stroke?
100 mm is a standard stroke for the 25 mm bore in the AirTAC catalog, where the standard range goes up to 250 mm.
How fast can it run?
AirTAC gives a speed range of 30-500 mm/s for this bore, with bumper cushioning. Use speed-control fittings to set the speed and keep impact at the stroke ends low.
Related parts
- Airtac TCL25X90S TCL Compact Cylinder
- Airtac TCL25X80S TCL Compact Cylinder
- All TCL/TCM Compact Cylinders
Common spare part for machines already running Airtac pneumatic components. Tell us the quantity and destination country and we will confirm stock and lead time.
Every part RendatSP supplies is new and original, carries a 1-year warranty and ships worldwide by air in 5 to 7 days once ready (shipping, payment and warranty). Send us the part number and quantity on WhatsApp or through the inquiry form and we will quote the same working day. Agents in Saudi Arabia, Iraq, the UAE, Egypt, Oman, Libya, Morocco, Mauritania, Yemen, Algeria and Jordan.
