,

Schneider RSB1A120P7 Zelio Interface Plug in Relay 12A 1CO without LED

تواصل معنا للسعر

Genuine Schneider Electric RSB1A120P7: interface plug in relay, Harmony Electromechanical Relays, 12A, 1CO, without LED, without lockable test button, 230V AC. New original Schneider, supplied by RendatSP with worldwide shipping.

رمز المنتج: RSB1A120P7 التصنيفات: , العلامة التجارية:
1اطلب عرض سعر3

1تحتاج هذه القطعة؟3 RSB1A120P7

1أرسل لنا رقم القطعة والكمية، وفريقنا الناطق بالعربية والإنجليزية يرد عليك بالسعر وحالة التوفر ومدة التوريد، عادةً خلال ساعات.3
1الكمية3
    1قطع أصلية بتغليف المصنع فقط3 1عرض سعر خلال ساعات، بالعربية أو الإنجليزية3 1شحن جوي أو بحري لكل دول العالم: الدول العربية وأفريقيا والأمريكتين وأوروبا3

1أو راسلنا على3 info@rendatsp.com · +86 181 5871 1787

Schneider RSB1A120P7 – interface plug in relay, Harmony Electromechanical Relays, 12A, 1CO, without LED, without lockable test button, 230V AC.

Zelio plug-in relays (RXM) and interface relays (RSB) isolate PLC outputs from loads and multiply contacts. They are cheap, fast to replace and a must-have spare in every control panel.

See our Schneider Electric range.

Technical data

Schneider reference RSB1A120P7
Series name RSB series
Product or component type Plug-in relay
Relay type Interface relay
Contacts type and composition 1 C/O
Status LED Without
[Uc] control circuit voltage 230 V AC 50/60 Hz
Control type Without lockable test button
[Ithe] conventional enclosed thermal current 12 A at -40 … 40 °C
Average resistance 33000 Ohm network: AC at 20 °C +/- 10 %
[Ue] rated operational voltage 184…345 V AC 50/60 Hz
[Uimp] rated impulse withstand voltage 3.6 kV conforming to IEC 61000-4-5
[Ie] rated operational current 12 A (AC-1/DC-1) NO conforming to IEC; 6 A (AC-1/DC-1) NC conforming to IEC
[Ui] rated insulation voltage 400 V conforming to IEC 60947
Maximum switching voltage 300 V DC conforming to IEC
Drop-out voltage threshold >= 0.15 Uc AC
Load current 12 A at 250 V AC; 12 A at 28 V DC
Minimum switching current 10 mA
Maximum switching capacity 3000 VA/336 W
Switching voltage 12 V
Minimum switching capacity 120 mW at 10 mA, 12 V
Condition New, original Schneider Electric

Key characteristics (per Schneider)

  • interface plug in relay
  • Harmony Electromechanical Relays
  • 12A
  • 1CO
  • without LED
  • without lockable test button
  • 230V AC

Typical applications

  • Contact multiplication in control circuits
  • Replacement of a worn plug-in relay
  • Interface between PLC outputs and loads

Compatibility and replacement

RXM relays use RXZE sockets; RSB relays use RSZE sockets. Check the coil voltage letter code (BD = 24 V DC, P7 = 230 V AC) before ordering.

Frequently asked questions

What is the coil voltage?

230 V AC 50/60 Hz

Do you ship to my country, and what is the warranty?

Yes. RendatSP ships worldwide from Yiwu, China, by air in 5 to 7 days once the part is ready, and every part carries a 1-year warranty. Send the order number and quantity on WhatsApp and we will reply with a quotation.

Before you order

Compare the complete order number on the old unit with this page, including the suffix: in most ranges the last characters set the coil voltage, current range or version. If the label is worn, send us a photo and we will identify the part.

Every part RendatSP supplies is new and original, carries a 1-year warranty and ships worldwide by air in 5 to 7 days once ready (shipping, payment and warranty). Send us the order number and quantity on WhatsApp or through the inquiry form and we will quote the same working day. Agents in Saudi Arabia, Iraq, the UAE, Egypt, Oman, Libya, Morocco, Mauritania, Yemen, Algeria and Jordan.

Scroll to Top