ABB DB25/25A Single Mounting Kit (stand-alone base) for TA25DU Overload Relays

The ABB DB25/25A is the genuine ABB stand-alone mounting kit for TA25DU thermal overload relays. Normally a TA relay clips directly onto the AX/AF contactor; the DB25/25A base gives it its own DIN-rail or screw mounting with terminals, which is needed when the relay sits away from the contactor, in retrofit panels, or when the contactor frame does not accept a direct-mount relay. It is a stocked spare for pump, compressor and motor control panels across Iraq, Saudi Arabia, the UAE and the wider Arab region.

Technical Specifications

Typical Applications

Separate mounting of TA overload relays in motor control panels, retrofits of older starters, and panels where the relay must sit on its own rail section.

Related ABB Overload Relays

• ABB TA25DU-0.4M
• ABB TA25DU-0.63M
• ABB TA25DU-1.0M
• ABB TA25DU-1.4M
• ABB TA25DU-1.8M
• ABB TA25DU-2.4M
• ABB TA25DU-3.1M
• ABB TA25DU-4.0M
• ABB TA25DU-5.0M
• ABB TA25DU-6.5M
• ABB TA25DU-8.5M
• ABB TA25DU-11M
• ABB TA25DU-14M
• ABB TA25DU-19M
• ABB TA25DU-25M
• ABB TA25DU-32M
• ABB TA42DU-25M
• ABB TA42DU-32M
• ABB TA42DU-42M
• ABB TA75DU-25M
• ABB TA75DU-32M
• ABB TA75DU-42M
• ABB TA75DU-52M
• ABB TA75DU-63M
• ABB TA75DU-80M
• ABB TA110DU-90
• ABB TA110DU-110
• ABB TA200DU-110
• ABB TA200DU-135
• ABB TA200DU-150
• ABB TA200DU-175
• ABB TA200DU-200

Frequently Asked Questions

What is the ABB DB25/25A used for?

It is a stand-alone base that lets a TA25DU thermal overload relay be mounted on DIN rail or screws instead of directly on the contactor.

Which relays fit the DB25/25A?

TA25DU.

Is it a genuine ABB part?

Yes, RendatSP supplies the genuine ABB DB25/25A, order code 1SAZ201108R0001, with quotes within hours and worldwide shipping.