SICK GTE2F-F5131, part number 1108571, is an energetic photoelectric proximity sensor from the SICK G2 family in the G2 Flat housing. It has a PNP switching output set to dark switching, a sensing range of 1 mm … 30 mm and is connected by male connector m8, 3-pin, 200 mm cable. Renda Trading Company supplies it as a genuine SICK part.
An energetic proximity sensor works on the amount of light reflected back from the object. It has no background suppression, so it is chosen where there is nothing behind the object within the sensing range, or where the background is far away or dark. In return it is simple, fast and detects light-coloured objects at a good distance for its size.
The G2 Flat housing measures 14 mm x 24 mm x 3.5 mm, so the sensor fits into the narrow gaps of packaging machines, small handling units, assembly cells and vending or banking machines where a standard sensor will not go. Protection is IP67 and the electronics are reverse-polarity protected, short-circuit protected and interference suppressed.
Technical Data
| Brand | SICK |
|---|---|
| رمز الموديل | GTE2F-F5131 |
| SICK part number | 1108571 |
| Product family | G2 (G2 Flat) |
| Functional principle | Photoelectric proximity sensor |
| Functional principle detail | Energetic |
| Sensing range max. | 1 mm … 30 mm |
| Sensing range | 2 mm … 25 mm |
| Type of light | Visible red light |
| Light source | PinPoint LED |
| Wavelength | 660 nm |
| Light spot size (distance) | diameter 11 mm at 30 mm |
| Adjustment | None |
| Switching output | PNP |
| Switching mode | Dark switching |
| Supply voltage | 10 V DC … 30 V DC |
| Current consumption | 20 mA (without load) |
| Output current | max. 50 mA |
| Response time | < 0.6 ms |
| Switching frequency | 800 Hz |
| Connection type | Male connector M8, 3-pin, 200 mm cable |
| Dimensions (W x H x D) | 14 mm x 24 mm x 3.5 mm |
| Housing material | Plastic, VISTAL |
| Optics material | Plastic, MABS |
| Enclosure rating | IP67 |
| Ambient operating temperature | -20 °C … +50 °C |
| Circuit protection | Reverse polarity, short-circuit and overcurrent protected, interference suppressed |
How to Read the Type Code GTE2F-F5131
SICK builds the G2 type code from the sensing principle, the housing and the wiring, so once the pattern is clear any part number in the family can be read at a glance.
- GTE2F identifies the sensing principle and the housing. GTB is background suppression, GTE is energetic proximity, GL is retro-reflective and GSE is a through-beam receiver. The digit 2 is the G2 family, and the final letter is the housing: S for G2 Slim and F for G2 Flat.
- F is the output: PNP output, dark switching. P and N are light switching, F and E are the dark-switching versions of the same electronics.
- 5 is the electrical connection: male connector M8, 3-pin on a 200 mm cable.
- The last three digits are the SICK device version, which fixes the sensing range and the optical set-up. On this model that is 131.
The number that matters when ordering is the SICK part number, 1108571, because it identifies exactly one article.
Typical Applications
SICK GTE2F-F5131 is used wherever a small, dependable switching signal is needed in a space that will not take a standard sensor. Common jobs include:
- Presence detection where the background is far away or absent
- Level and end-of-travel checks inside small machines
- Bottle, cap and can detection on short conveyor sections
- Detection of light-coloured objects at a modest distance in a 3.5 mm housing
- Cost-sensitive OEM machines needing a compact reliable proximity sensor
The PNP output makes it easy to wire into the digital inputs of the usual PLCs. PNP is the normal choice for European and Gulf-built control panels with sinking inputs. In dark switching the output is on when the object is absent, or when the beam is interrupted.
Other GTE2F Models
Every GTE2F version that Renda Trading supplies is listed below. The electronics are the same across a range group; only the output, the switching mode and the connection change.
| رمز الموديل | Part no. | Sensing range max. | Output | Switching mode | Connection |
|---|---|---|---|---|---|
| GTE2F-E5111 | 1108576 | 1.5 mm … 15 mm | NPN | Dark switching | Male connector M8, 3-pin, 200 mm cable |
| GTE2F-E1111 | 1108574 | 1.5 mm … 15 mm | NPN | Dark switching | Cable, 3-wire, 2 m |
| GTE2F-F5111 | 1108575 | 1.5 mm … 15 mm | PNP | Dark switching | Male connector M8, 3-pin, 200 mm cable |
| GTE2F-F1111 | 1108573 | 1.5 mm … 15 mm | PNP | Dark switching | Cable, 3-wire, 2 m |
| GTE2F-N5111 | 1108482 | 1.5 mm … 15 mm | NPN | Light switching | Male connector M8, 3-pin, 200 mm cable |
| GTE2F-N1111 | 1108480 | 1.5 mm … 15 mm | NPN | Light switching | Cable, 3-wire, 2 m |
| GTE2F-P5111 | 1108481 | 1.5 mm … 15 mm | PNP | Light switching | Male connector M8, 3-pin, 200 mm cable |
| GTE2F-P1111 | 1108479 | 1.5 mm … 15 mm | PNP | Light switching | Cable, 3-wire, 2 m |
| GTE2F-E5131 | 1108572 | 1 mm … 30 mm | NPN | Dark switching | Male connector M8, 3-pin, 200 mm cable |
| GTE2F-E1131 | 1108570 | 1 mm … 30 mm | NPN | Dark switching | Cable, 3-wire, 2 m |
| GTE2F-F5131 | 1108571 | 1 mm … 30 mm | PNP | Dark switching | Male connector M8, 3-pin, 200 mm cable |
| GTE2F-F1131 | 1108569 | 1 mm … 30 mm | PNP | Dark switching | Cable, 3-wire, 2 m |
| GTE2F-N5131 | 1108126 | 1 mm … 30 mm | NPN | Light switching | Male connector M8, 3-pin, 200 mm cable |
| GTE2F-N1131 | 1108124 | 1 mm … 30 mm | NPN | Light switching | Cable, 3-wire, 2 m |
| GTE2F-P5131 | 1108125 | 1 mm … 30 mm | PNP | Light switching | Male connector M8, 3-pin, 200 mm cable |
| GTE2F-P1131 | 1108123 | 1 mm … 30 mm | PNP | Light switching | Cable, 3-wire, 2 m |
The Rest of the SICK G2 Family
The G2 family covers four sensing principles in two miniature housings. If this model is not the right principle for your job, the others are on the site:
- GTB2S background suppression, G2 Slim housing
- GTB2F background suppression, G2 Flat housing
- GTE2F energetic proximity, G2 Flat housing (this page)
- GL2S retro-reflective, G2 Slim housing
- GSE2S through-beam, G2 Slim housing
Frequently Asked Questions
What is SICK GTE2F-F5131?
SICK GTE2F-F5131, part number 1108571, is a G2 miniature photoelectric sensor in the G2 Flat housing. Its functional principle is energetic, the sensing range is 1 mm … 30 mm, the output is PNP with dark switching, and the connection is male connector m8, 3-pin, 200 mm cable.
What is the sensing range of GTE2F-F5131?
The maximum sensing range is 1 mm … 30 mm. The reliable working range quoted by SICK is 2 mm … 25 mm.
Is GTE2F-F5131 PNP or NPN?
It has a PNP switching output. PNP switches the positive line to the input, which is what most European and Gulf control panels expect. SICK offers the same sensor with the opposite output under a different type code, so check the model table on this page before ordering.
Is GTE2F-F5131 light switching or dark switching?
Dark switching. The output is active when the receiver does not see light.
How is GTE2F-F5131 connected?
The connection is male connector m8, 3-pin, 200 mm cable. Supply voltage is 10 V DC to 30 V DC with a current consumption of about 20 mA, and the output can drive up to 50 mA. The outputs are short-circuit and overcurrent protected and the supply is reverse-polarity protected.
What are the dimensions of GTE2F-F5131?
The G2 Flat housing measures 14 mm x 24 mm x 3.5 mm (W x H x D). Enclosure rating is IP67 and the operating temperature range is -20 °C … +50 °C.
When should I choose GTE2F instead of GTB2F?
Choose the energetic GTE2F when there is no disturbing background within the sensing range and the objects are reasonably light in colour, since it is the simpler and more economical sensor. Choose the background suppression GTB2F when a wall, a guard or a conveyor belt sits behind the object, or when dark objects have to be detected as reliably as light ones.
Is GTE2F-F5131 a genuine SICK product?
Yes. Renda Trading Company supplies original SICK sensors with SICK part numbers. The data on this page is taken from the official SICK data sheet for GTE2F-F5131, part number 1108571.
How do I order GTE2F-F5131 from Renda Trading?
Send us the type code GTE2F-F5131 or the part number 1108571 with the quantity you need and we will reply with price, availability and delivery time. If you are replacing a failed sensor, send a photo of the label and we will confirm the exact model.
Ordering SICK GTE2F-F5131 from Renda Trading
Renda Trading Company supplies genuine SICK sensors to factories and machine builders in Saudi Arabia, Iraq, the UAE and the wider Arab region. We quote per enquiry, because price depends on quantity and delivery time.
- Type code: GTE2F-F5131
- SICK part number: 1108571
- Brand: SICK
- Family: G2 miniature photoelectric sensors, G2 Flat housing
- Availability: contact us for current stock and lead time
Send the part number and quantity and we will come back with a quotation. If you are unsure which version you need, tell us the object you have to detect, the distance, the space available and whether your controller needs PNP or NPN, and we will confirm the right model first.
