The Delta ECMA-CA0604SS is a 400 W AC servo motor with an 60 mm flange, 1.27 N.m rated torque at 3000 rpm and a absolute, 17-bit single turn and 16-bit multi turn encoder. It is matched to Delta ASDA-A2 servo drives.
Technical Specifications
| Brand | Delta Electronics |
|---|---|
| Series | ECMA |
| Model number | ECMA-CA0604SS |
| Rated output power | 400 W |
| Flange / frame size | 60 mm |
| Rated torque | 1.27 N.m |
| Maximum torque | 3.82 N.m |
| Rated speed | 3000 rpm |
| Maximum speed | 5000 rpm |
| Rated current | 2.60 Arms |
| Maximum current | 7.80 Arms |
| Rotor inertia | 0.30 x 10-4 kg.m2 |
| Weight | 2.0 kg |
| Shaft | 14 mm h6 keyway with tapped hole |
| Holding brake | Yes, 24 V DC, 1.3 N.m holding |
| Encoder | Absolute, 17-bit single turn and 16-bit multi turn |
| Rated voltage | 220 V class |
| Protection | IP65 with waterproof connectors and oil seal |
| Matching drives | ASDA-A2 |
Key Features
- Permanent magnet AC servo motor with a absolute, 17-bit single turn and 16-bit multi turn encoder
- Keyway shaft with tapped centre hole and oil seal fitted
- Holding brake fitted, 24 V DC, applied on power loss
- Maximum torque of 3.82 N.m for acceleration and short overloads
- Matched to Delta ASDA-A2 drives as a complete servo set
Typical Applications
- Indexing and positioning axes
- Packaging and labelling machines
- Textile and printing machinery
- Pick and place and assembly equipment
- Small CNC and engraving machines
- Conveyor and feeder synchronisation
Frequently Asked Questions
Does ECMA-CA0604SS have a holding brake?
Yes. The S in the shaft option field means a 24 V DC holding brake is fitted. The brake holds the load when power is removed; it is not a dynamic stopping brake.
Which drive do I use with ECMA-CA0604SS?
Delta ASDA-A2 at the same power rating. We normally supply the drive, the motor, the power cable and the encoder cable together as a matched set.
What does the part number ECMA-CA0604SS mean?
Reading the code: the letter after ECMA sets the voltage and rated speed, the next digit is the encoder type, the next two digits are the flange size in millimetres, the next two are the power, then the shaft and brake option letter, then the shaft diameter code.
What is the shaft size on ECMA-CA0604SS?
The shaft is 14 mm h6 keyway with tapped hole.
Ordering and Delivery
RendatSP supplies this item to factories, machine builders and maintenance teams across the Middle East and Africa. Send us the model number and the quantity you need and we will come back with price, lead time and shipping to your country. Technical help with selection and replacement is included at no charge.
