The Semikron SEMiX223GB12E4p is a IGBT module rated 225 A at 1200 V, supplied in the SEMiX 3p housing.
IGBT modules are the power switches of inverter drives, UPS systems, welders and converters: they switch the DC-link voltage to build the motor or output current, so a failed module is one of the most common causes of a drive fault.
More Semikron power modules for drive repair: Semikron range.
The SEMiX223GB12E4p is a 1200 V IGBT module and comes as bare module without pre-applied thermal interface material or lid, ideal for custom assembly processes.
Technical data
| Type | SEMiX223GB12E4p |
|---|---|
| Semikron Danfoss product number | 27895002 |
| Product line | SEMiX |
| Housing | SEMiX 3p |
| Technology | IGBT |
| Topology | Half-Bridge |
| Rated current | 225 A |
| Voltage class | 1200 V |
| Chip technology | IGBT 4 (Trench) |
| Dimensions (L x W x H) | 150x62x17 mm |
| Net weight | 0.35 kg |
| Delivery form | Bare module without pre-applied TIM or lid |
| Product status | In Production |
| Brand | Semikron Danfoss |
| Condition | New, original |
Features (per Semikron Danfoss)
- Homogeneous Si
- Trench: Trenchgate technology
- VCE(sat) with positive temperature coefficient
- High short circuit capability
- Press-fit pins as auxiliary contacts
- UL recognized, file no. E63532
Typical applications
- Repair of drives using the same module
- Solar and wind converters
- Welding power sources
- UPS
- Renewable energy systems
Compatibility and replacement
Order with the complete Semikron type SEMiX223GB12E4p; in Semikron type codes the digits and letters set the current, voltage class, topology and chip generation, so a module with a similar number may not be a direct replacement.
The values in the table come from the official Semikron Danfoss product data; for full electrical ratings (VCE(sat), switching losses, thermal resistance) we send the datasheet with the quotation.
Before you replace it
- Gate driver compatibility and thermal paste / mounting torque
- Chip generation (T4, E4, V, M7) when replacing in an existing drive
- Housing (SEMITRANS 2/3, SEMiX) and terminal layout
Frequently asked questions
Should the gate driver be checked when the module failed?
Yes. A failed IGBT often damages the gate driver as well; check the driver, the DC-link capacitors and the thermal paste before fitting the new module.
What is the current and voltage rating?
225 A at a voltage class of 1200 V, according to the Semikron Danfoss product data.
Which housing does it use?
SEMiX 3p, with dimensions of 150x62x17 mm, according to the Semikron Danfoss product data.
What is the topology?
Half-Bridge (IGBT), according to the Semikron Danfoss product data.
Which chip technology is used?
IGBT 4 (Trench), according to the Semikron Danfoss product data.
Can I get the datasheet?
The official manufacturer data is the source of the technical values above; we can send the datasheet with the quotation on request.
How fast can you deliver, and is there a warranty?
Air shipping usually takes 5 to 7 days once the part is ready, to almost any country. Each part is new and original with a 1-year warranty. Message us on WhatsApp with the order number for a quotation.
Before you order
Compare the complete order number on the old unit with this page, including the suffix: in most ranges the last characters set the coil voltage, current range or version. If the label is worn, send us a photo and we will identify the part.
Need it fast? Send the order number, quantity and delivery country on WhatsApp or through the inquiry form and we reply with a quotation the same working day. All parts are new and original, covered by a 1-year warranty, and ship worldwide by air in 5 to 7 days once ready (shipping, payment and warranty). Local agents: Saudi Arabia, Iraq, the UAE, Egypt, Oman, Libya, Morocco, Mauritania, Yemen, Algeria and Jordan.
